3 Pole Panel Mount Non Fused Isolator Switch, 32 A, 15 kW, IP65

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CZ
Productomschrijving

Schneider Electric Isolator Switch - TeSsys Vario Range

Forming part of Schneider Electrics TeSys Vario Switch range is this isolator switch which is sometimes referred to as a switch disconnector. Comprised of a non-corrosive and resistant material that is suitable for harsh environments, this three-pole version is perfectly suited for manual motor control applications. Super easy to connect and wire as it comes to you undrilled, which enables variable cable entry positions.

switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments. This range of isolator switches from Schneider is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

Features & Benefits

• Performs local isolation, manual override & safety switch functions
• For use in applications where there is a need to disconnect electrical equipment from the circuit, most commonly needed for repair and maintenance of electrical equipment
• These disconnect switches can also be used as safety switches
• Created and designed to safely isolate a circuit whilst it is being used or maintained

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

How does an isolator switch work?

This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Note

Expandable by attachment of auxiliary contact or main/neutral pole (except 10,16 20, 25 & 32A Typically: 257-3752)

//media.rs-online.com/t_line/L433762-01.gif
//media.rs-online.com/t_line/L433762-02.gif
//media.rs-online.com/t_line/LF433762-02.gif
//media.rs-online.com/t_line/LI257352-01.gif
Specificaties
Kenmerk Waarde
Number of Poles 3
Range TeSys
Maximum Current 32 A
Mounting Type Panel Mount
Series VARIO
Power Rating 15 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Electrical Phase 3
Switch Rating 8 kV
Length 146mm
Width 90mm
Depth 131mm
Terminal Type Connector
Handle Colour Red
Maximum Operating Temperature +50°C
Minimum Operating Temperature -20°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07/04/2020, met een levertijd van 1 werkdag.
Prijs Each
65,36
(excl. BTW)
79,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
65,36 €
5 - 9
63,37 €
10 +
61,32 €
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
The 194E switch disconnector range forms part of ...
Description:
The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice, all switch materials can be recycled. Universal terminal screws are fitted for ’Pozidriv’ or flat ...
High impact polycarbonate enclosures to IP65Lockable with up ...
Description:
High impact polycarbonate enclosures to IP65Lockable with up to four padlocks in the OFF positionVersions available with N/O early break auxiliary contactsEarth terminal provided, neutral terminal not includedAux. contact not feasible in 3 pole units160A unit fitted with terminal lugs ...
High impact grey polycarbonate enclosure, UV stabilised to ...
Description:
High impact grey polycarbonate enclosure, UV stabilised to IP66/67Low profile red/yellow operating handle integral with enclosure coverLockable with up to three padlocks in the OFF position; lid interlocked in the ON positionEarth terminal includedNominal switching voltage 690 V.