3 Pole Panel Mount Non Fused Isolator Switch, 10 A, 4 kW, IP65

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CZ
Productomschrijving

Schneider Electric Isolator Switch - TeSsys Vario Range

Forming part of Schneider Electrics TeSys Vario Switch range is this isolator switch which is sometimes referred to as a switch disconnector. Comprised of a non-corrosive and resistant material that is suitable for harsh environments, this three-pole version is perfectly suited for manual motor control applications. Super easy to connect and wire as it comes to you undrilled, which enables variable cable entry positions.

switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments. This range of isolator switches from Schneider is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

Features & Benefits

• Performs local isolation, manual override & safety switch functions
• For use in applications where there is a need to disconnect electrical equipment from the circuit, most commonly needed for repair and maintenance of electrical equipment
• These disconnect switches can also be used as safety switches
• Created and designed to safely isolate a circuit whilst it is being used or maintained

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

How does an isolator switch work?

This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Note

Expandable by attachment of auxiliary contact or main/neutral pole (except 10,16 20, 25 & 32A Typically: 257-3752)

//media.rs-online.com/t_line/L433762-02.gif
//media.rs-online.com/t_line/LD433762-02.gif
//media.rs-online.com/t_line/LF433762-02.gif
//media.rs-online.com/t_line/LI257352-01.gif
Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 10 A
Range TeSys
Mounting Type Panel Mount
Series VARIO
Power Rating 4 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Electrical Phase 3
Switch Rating 8 kV
Length 146mm
Width 90mm
Depth 131mm
Minimum Operating Temperature -20°C
Terminal Type Connector
Maximum Operating Temperature +50°C
Handle Colour Red
13 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
35,66
(excl. BTW)
43,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
35,66 €
5 - 9
34,57 €
10 +
33,45 €