3P Pole Enclosed Non Fused Isolator Switch, 3NO, 40 A, 18.5 kW, IP20, IP65

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CZ
Productomschrijving

Schneider Electric Isolator Switch - Vario Range

Forming part of Schneider Electrics Vario Switch range is this selection of isolator switches which are sometimes referred to as switch disconnectors. Comprised of a strong and durable material that is suitable for a multitude of environments, these three-pole versions are perfectly suited for manual motor control applications. Super easy to connect and wire as it comes to you undrilled, which enables variable cable entry positions.

switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments. This range of isolator switches from Schneider is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

Features & Benefits

• Performs local isolation, manual override & safety switch functions
• For use in applications where there is a need to disconnect electrical equipment from the circuit, most commonly needed for repair and maintenance of electrical equipment
• These disconnect switches can also be used as safety switches
• Created and designed to safely isolate a circuit whilst it is being used or maintained
• Supplied as a complete kit in one pack, the kit includes a 3-pole switch body, terminal shroud, extension shaft door interlock and operation assembly with a red/yellow emergency switch

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

How does an isolator switch work?

This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Note

The figures quoted for rated operational power within the price table are with respect to a voltage of 230/240V, with figures within brackets ( ) being those with respect to a voltage of 690V.
The higher current rating refers to use in free air, the lower current rating represents use in an enclosure.

Approvals

UL, CSA, GL

//media.rs-online.com/t_line/L433981-01.gif
Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 40 A
Range TeSys
Mounting Type Enclosed
Series VARIO
Normal State Configuration 3NO
Power Rating 18.5 kW
IP Rating IP20, IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Electrical Phase 3
Switch Rating 8 kV
Handle Colour Red
Minimum Operating Temperature -20°C
Maximum Operating Temperature +50°C
Terminal Type Screw
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
55,77
(excl. BTW)
67,48
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
55,77 €
5 - 9
54,06 €
10 +
52,33 €
Related Products
ABB OT series switch disconnectors are largely used ...
Description:
ABB OT series switch disconnectors are largely used as the main switch in low voltage switchgears or distribution of power, starting and stopping motors and isolating loads during maintenance. A wide range from 16 A to 160 A, available as ...
The switches fully conform to IEC204, VDE 0660 ...
Description:
The switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.
The 194E switch disconnector range forms part of ...
Description:
The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice, all switch materials can be recycled. Universal terminal screws are fitted for ’Pozidriv’ or flat ...
Adaptable with simple attachment of auxiliary contact, neutral ...
Description:
Adaptable with simple attachment of auxiliary contact, neutral pole, or up to 3 main poles to basic 3-pole switchSuitable for main/emergency switching 690V nominal voltageIngress protection IP55Full compliance with BS/EN 60947-3Supplied as complete kit in one pack.