Red Neon Indicator Lamp, Wire Terminal, 105 → 125 V ac

  • RS-stocknr. 891-3777
  • Fabrikantnummer 2110A1
  • Fabrikant VCC
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CR
Productomschrijving

2110A, 2111A, 2112A, 2113A & 2195A Series - VCC

VCC 2110A, 2111A, 2112A, 2113A and 2195A series non-replaceable neon indicator lights, feature a wide voltage range and low current rating whilst providing a bright indicator light suitable for a wide range of applications. These indicators are push fit mounted into a 8 mm panel cut out, and supplied with a push-on speed nut to secure.

Polycarbonate lens
White nylon housing

Neon-Incandescent Indicator Lights

Specificaties
Kenmerk Waarde
Lamp Base Wire Terminal
Light Colour Red
Voltage Rating 105 → 125 V ac
Length 42.42 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11/10/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 10)
2,633
(excl. BTW)
3,186
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
2,633 €
26,33 €
*prijsindicatie
Related Products
Evenly distributed lightEnergy savings of up to 50 ...
Description:
Evenly distributed lightEnergy savings of up to 50 % (compared to luminaires that use fluorescent lamps)Easy installation as mounting brackets can be positioned freely on the luminaireEasy access to electrical terminal thanks end caps with twist and lock mechanismTool-free electrical ...
Chromed bezel lampholders, available with flat or domed ...
Description:
Chromed bezel lampholders, available with flat or domed lens. Rear access to lamp. Ratings: Max. voltage between contacts, 150V; max. voltage between contacts and case 500V; max. Compatible with all our transformer indicator lampholdersCompatible with MES stock nos 589-777 and ...
Dialight incandescent lamp holders and lenses to the ...
Description:
Dialight incandescent lamp holders and lenses to the T1-3/4 filament bulbs. Various sizes available6 to 250 V operation.
Heat Resistant tails, live, neutral, loop-in and earth ...
Description:
Heat Resistant tails, live, neutral, loop-in and earth terminalsAll MK lampholders are heat resistant to category T2 of BS EN 61184 and are therefore capable of operation with lamp cap temperatures up to 210°C.1174 WHI also incorporates heat resistant wires ...