Onlangs gezocht

    Electromen OY DC Motor Controller, 12 → 42 V dc, 100 A, 42 V dc

    RS-stocknr.:
    183-7333
    Fabrikantnummer:
    EM-282C
    Fabrikant:
    Electromen OY
    Electromen OY
    Bekijk alle Motor Controllers
    1 op voorraad - levertijd is 1 werkdag(en).
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    344,91 €

    (excl. BTW)

    417,34 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +344,91 €
    RS-stocknr.:
    183-7333
    Fabrikantnummer:
    EM-282C
    Fabrikant:
    Electromen OY
    Land van herkomst:
    FI

    Datasheets


    Wetgeving en conformiteit

    Land van herkomst:
    FI

    Productomschrijving

    Electromen - EM-282C DC MOTOR CONTROLLER, 12-42 V DC, 100 A


    The EM-282 is a full bridge DC-motor starter. It is designed to work with DC-motor in applications where some special functions are needed.
    Starter has adjustable acceleration and deceleration ramps, which make possible the smooth starts and stops,adjustable current limit protects motor against overcurrent and there is also current limitation for brake (regeneration).

    This device has also two settable speeds, which are useful in positioning applications.
    Control inputs FW and BW start the forward and backward run.
    STOP is for the motor shut-down but there are also available individual limit inputs for FW and BW directions.
    SPEED-2 input activates pre-set speed-2, but it can also be used as input for analogue speed control signal 0-5V.
    FAULT terminal has at the same time input and output function, the pin is normally high, but is pulled down in overheat and conditionally also in current trip situation
    There are 2 selectable control modes, continuous and impulse. In continuous mode the motor runs as long as the control is active. In impulse mode a short command starts the motor, and only a new impulse will change the status.
    The card has selectable input logics for both control and limit inputs
    For parameters setting there is 3 options: EM-236 interface unit, EM-268 with Menthol-Lite PC-program and EM-326 with Menthol-App application for smartphone

    Features and Benefits


    12-48V dc, 80-100A continuous, 160-200A peak
    Speed, direction, current limiting, soft start/stop, braking load output and auto-reverse control
    Limit switch inputs for end of travel
    Compact, din rail mountable
    EM-A1 card slot option for symmetrical control ±5V or ±10V (rev-stop-fwd)

    Compact with high current output
    Brake load output
    Current limit for motor and brake
    Zero current limit
    Speed setting
    Flexible control inputs
    Impulse / continuous mode
    DIN rail mountable
    2kHz or 16kHz PWM frequency
    Freewheel and auto reverse options
    Running indicator
    Expanded input options
    Fan output
    12-24Vdc version:
    Motor current max. continuous 100A ( at 25°C amb temp),
    80A ( at 60° amb temp ) and peak 200A ( 5s )
    Current handling reduced by 20% at 16kHz PWM
    24-48Vdc version:
    Motor current max. continuous 80A (at 25°C amb. temp)
    70A ( at 50° amb temp ) and peak 160A ( 5s )
    Current handling reduced by 20% at 16kHz PWM

    High current output
    Brake load output
    Current limit
    Current limit for brake also
    Zero-current limit
    Speed setting/adjustment
    Flexible control inputs
    Impulse / continuous mode
    Rail base mountable
    Digital parameter setting
    C versions program
    2/16kHz pwm freq. options
    Freewheel options
    Autoreverse option
    Running indication options
    Expanded input logic options
    Thermal cont. Fan-output (pcb v.3)


    Specificaties

    KenmerkWaarde
    Supply Voltage12 → 42 V dc
    Current Rating100 A
    Voltage Rating42 V dc
    1 op voorraad - levertijd is 1 werkdag(en).
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    344,91 €

    (excl. BTW)

    417,34 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +344,91 €