RS PRO Red LED Reflector Bulb, Midget Groove Base, 6mm Diameter, 40mcd
- RS-stocknr.:
- 206-069
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 206-069
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
T1 3/4 midget groove (ac/dc) multi-chip LEDs
LED lamps contain 6 LED chips, full wave bridge rectifier and a current limiting resistor
Bi-polar dc. connections
Bi-polar dc. connections
Multi-Chip LEDs
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps.
Very high immunity to shock and vibration
Current consumption is between 50 and 65% lower
Lower operating temperatures
Current consumption is between 50 and 65% lower
Lower operating temperatures
Note
The operating voltage must not be exceeded by more than 10% as this will result in reduced life expectancy.
Specificaties
Kenmerk | Waarde |
|---|---|
| Light Output Colour | Red |
| Intensity | 40mcd |
| Lamp Base | Midget Groove |
| Chip Type | Multichip |
| Diameter | 6mm |
| Length | 15.25mm |
| Viewing Angle | 180 ° |
| Peak Wavelength | 630nm |
| Current Rating | 30mA |
| Life Hours | 100000h |