Onlangs gezocht

    RS PRO Adhesive Lined Heat Shrink Tube, Yellow 6.4mm Sleeve Dia. x 1.2m Length 3:1 Ratio

    RS-stocknr.:
    241-7365
    Fabrikant:
    RS PRO
    RS PRO
    Bekijk alle Heat Shrink Tubing
    9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    165 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    6,91 €

    (excl. BTW)

    8,36 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 146,91 €
    15 - 496,57 €
    50 +6,22 €
    RS-stocknr.:
    241-7365
    Fabrikant:
    RS PRO
    Land van herkomst:
    JP

    Datasheets


    Wetgeving en conformiteit

    Land van herkomst:
    JP

    Productomschrijving

    RS Pro Adhesive Lined Polyolefin Heat Shrink Tubing with 3:1 Shrink Ratio


    From RS Pro a range of high quality, easy to use adhesive lined or dual wall heat-shrink tubing made from flexible, flame retardant Polyolefin. This heat shrinkable tubing has a high shrink ratio of 3:1 which means it shrinks to a third of its original diameter and is ideal for covering irregular or awkward shapes. The adhesive lining of this tubing, when melted, provides a watertight sealing and encapsulates wire joints.


    What is Heat Shrink Tubing?


    Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to provide protection and insulation. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state


    How to use Heat Shrink Tubing


    The diameter of the wire or cable is measured and the correct sized heat shrink tubing selected. A piece tubing is cut to size which is long enough to cover the connection or joint after heating. This then slides onto the wire. After the cable or wire has been joined the heat shrink tubing is moved over the joint and heated with a heat gun until it forms a tight wrapping around the joint


    Features and Benefits of Adhesive Lined Flexible Polyolefin Heat Shrink Tubin


    Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially a third of its original diameter hence the ratio of 3:1. This tube has an inner adhesive lining, which, when heated, melts to form a watertight sealing around the joint. This type of heat shrink is also called dual wall heat shrink.


    • Very flexible
    • Adhesive lined for waterproof sealing
    • Flame retardant
    • Good adhesion to metals, polyolefin and PVC
    • 3:1 shrink ratio, ideal for irregular shapes
    • Operating temperature range of -55 to +110°C
    • 110°C shrink temperature
    • Excellent electrical insulation properties
    • Resistant to common fluids and solvents
    • Excellent abrasion resistance


    What is Polyolefin Heat Shrink Tubing Used For?


    This polyolefin adhesive lined heat shrink is very versatile and is used in both commercial and industrial applications. The meltable adhesive liner provides waterproof sealing and encapsulation for cable joints, wire branches and in-line components such as disconnect terminals and wire splices. This adhesive tubing is also ideal for encapsulating electronic devices that have irregular shapes or profiles. Applications include the following:


    • Waterproof sealing and encapsulation of wire joints
    • Electrical insulation
    • Environmental protection against moisture, dust and chemicals.
    • Mechanical protection to wires and small parts from abrasion
    • Mechanical strain relief on cable and connector joints to prevent damage caused by flexing or bending
    • Bundling and organizing harness wires, cable and tubing
    • Colour coded identification of cables, wires and components


    Approvals

    UL224 125°C 600V, CSA C22.2 No.198.1

    Standards

    MIL - DTL-23053/4 class 3, UL224 125°c 600v E75077 CSA C22.2 No.198.1.


    Specificaties

    KenmerkWaarde
    Sleeve Diameter6.4mm
    Shrunk Diameter2mm
    ColourYellow
    Sleeve TypeHeat Shrink
    Adhesive LinedYes
    Shrink Ratio3:1
    Sleeve Length1.2m
    MaterialPolyolefin
    Flame RetardantYes
    Halogen FreeNo
    Standards MetAMS-DTL-23053/4 Class 3, RoHS Compliant, UL 224 E75077 CSA C22.2 No.198.1
    9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    165 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    6,91 €

    (excl. BTW)

    8,36 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 146,91 €
    15 - 496,57 €
    50 +6,22 €