Onlangs gezocht

    3M PELTOR G3000 Blue Safety Helmet, Adjustable, Ventilated

    3M PELTOR
    RS-stocknr.:
    494-9814
    Fabrikantnummer:
    G3000 CUV-BB
    Fabrikant:
    3M PELTOR
    Bekijk alle Hard Hats
    2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    5 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    16,20 €

    (excl. BTW)

    19,60 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 616,20 €
    7 - 1415,55 €
    15 - 3915,06 €
    40 +14,25 €
    RS-stocknr.:
    494-9814
    Fabrikantnummer:
    G3000 CUV-BB
    Fabrikant:
    3M PELTOR

    Wetgeving en conformiteit

    N.v.t.

    Land van herkomst:
    PL

    Productomschrijving

    Standards

    EN 397

    3M™ Hard Hat, Pinlock, Ventilated, Blue, G3000


    Introducing the G3000 from 3M™, it's a ventilated hard hat with a slim, softly rounded design without any sharp or protruding components. The life of a hart hat is affected by physical, chemical damage and UV radiation from the sun. When exposed to sunlight the stability of the plastic shell may be adversley affected due to the UV radiation interaction with the plastic material which can weaken the hat and compromise the safety of the user.

    The 3M™ G3000 uses the Uvicator™ sensor to easily detect the integrity and safety of the helmet related to UV radiation. It's easily and clearly visible to show when the helmet has been overexposed to UV radiation and thus needs replacing.

    The sturdy, rigid helmet shell also easily withstands pressure from the side and fulfills all safety-related requirements for construction or industrial work. Optimised for staying cool, with more ventilation holes than conventional ventilated helmets. The hard hat has a short peak which makes it good for upward and wider vision.

    Features and Benefits


    Comfortable, secure fit with continuous width adjustment

    Resistant to hot molten metal splash Side Euroslot adapters for earmuffs

    Safety helmet with a slot on the front for helmet lights

    side slots for attaching earmuffs and visor

    For very low temperatures (-30 °C) and molten metal (MM) splash

    Three variable air vents for maximum ventilation

    Suspension harness with Pinlock for variable width adjustment

    Six-point textile band attachment ensures optimal fit and comfort

    Optional chin strap see stock number 494-9820

    Typical Applications


    Typically made from a hard plastic to reduce the chance of injury from falling or flying objects. Used by:

    Labourers involved in earth moving activities

    Supervisors/Architects when inspecting work

    FAQ's


    How often should you replace a hard hat?


    As a general guideline, hard hats should be replaced every 5 years for general use. However, replacement every 2 years is suggested for hard hats exposed to higher temperatures or extreme sunlight.


    Specificaties

    KenmerkWaarde
    ColourBlue
    Chin Strap IncludedNo
    VentedYes
    Integrated Eye ShieldNo
    Adjustable SizeYes
    MaterialABS
    Accessory SlotsYes
    LiningNo
    Integral SweatbandYes
    Peak TypeShort
    Complies with EN 397Yes
    RangeG3000

    2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    5 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    16,20 €

    (excl. BTW)

    19,60 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 616,20 €
    7 - 1415,55 €
    15 - 3915,06 €
    40 +14,25 €