Infineon Hall Effect Sensor, 20 V
- RS-stocknr.:
- 253-9863
- Fabrikantnummer:
- TLE4999C4S0001HALA1
- Fabrikant:
- Infineon
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 3,50
(excl. BTW)
€ 4,24
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 1.973 stuk(s) vanaf 10 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 3,50 |
| 10 - 24 | € 3,33 |
| 25 - 49 | € 3,19 |
| 50 - 99 | € 3,04 |
| 100 + | € 2,83 |
*prijsindicatie
- RS-stocknr.:
- 253-9863
- Fabrikantnummer:
- TLE4999C4S0001HALA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Supply Voltage | 20 V | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Supply Voltage 20 V | ||
The Infineon TLE series is a Dual channel linear Hall sensor with a bus-capable digital Short-PWM-code interface. Both channels are integrated on one die in the chip. The sensor is developed in compliance to ISO 26262. Highest accuracy over a wide temperature range and lifetime is achieved by an integrated digital temperature- and stress-compensation.
Two highly accurate redundant hall measurement channels integrated on one chip
Operating automotive temperature range -40°C to 150°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
2 x 16 bit user-configurable ID in EEPROM
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Multipoint calibration up to 9 points
Operating automotive temperature range -40°C to 150°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
2 x 16 bit user-configurable ID in EEPROM
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Multipoint calibration up to 9 points
Gerelateerde Links
- Infineon Hall Effect Sensor, 20 V
- Infineon Hall Effect Sensor, 2.2 V
- Infineon SMD Hall Effect Sensor
- Infineon Through Hole Hall Effect Sensor, Open Collector Output, 24 V
- Infineon Through Hole Hall Effect Sensor, Open Drain Output, 32 V
- Infineon SMD/SMT Hall Effect Sensor, Analogue Output, 4.5-5.5 V
- Infineon SMD Hall Effect Sensor Latch
- Infineon SMD Hall Effect Sensor Switch
