Siemens Motion Sensing Alarm Motion Sensing Alarm Unit

  • RS-stocknr. 804-4086
  • Fabrikantnummer 7MH7144-1AA2
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CA
Productomschrijving

Siemens Milltronics Motion Sensing

Siemens motion sensing controller and sensor combinations are used to detect changes in operation, such as motion an speed that could lead to costly malfunctions and failure. The MFA 4p controller on detection of a problem can send a signal via contacts to shut down machinery to prevent further damage or losses. Single set-point operation makes these units suitable for a variety of industries including, water and waste water. Requires a motion sensor 8044102 and sensor controller 8044086 for operation

Probe can be mounted up to 100mm from target
Selectable over-speed or under-speed detection
Start-up time delay
Temperature rating: -40°C to +60°C
IP67 rated (probe)
NEMA 4X, polycarbonate enclosure (alarm controller)
Aluminium Body (probe)

Specificaties
Kenmerk Waarde
Accessory Type Motion Sensing Alarm Unit
For Use With MSP Probe, XPP Probe
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
552,86
(excl. BTW)
668,96
(incl. BTW)
Aantal stuks
Per stuk
1 +
552,86 €
Related Products
Flow switch series from Cynergy3. These flow switches ...
Description:
Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. ...
The Pulsite Solo is a versatile digital rate ...
Description:
The Pulsite Solo is a versatile digital rate and total flow indicator instrument that can be panel or surface mounted, depending on your requirements. The housing is constructed from a durable polymer and sealed to IP65 rating, making it suitable ...
The Omron E8FC is a transmitter adapter used ...
Description:
The Omron E8FC is a transmitter adapter used with a flowmeter sensor. It is used to measure differential pressure to determine fluid flow. It is made from austenitic stainless steel (SUS304). • It uses 1/2IN R taper thread type.
Detect Signs of Abnormalities in Cooling Water by ...
Description:
Detect Signs of Abnormalities in Cooling Water by Simultaneous Measurement of “Flow Rate + Temperature” Multi-sensing of “Flow rate + temperature” for preventing a sudden stops or manufacturing defects.Various lineup of replacement adapters to enable easy replacement of your current ...