Omron, 0 → 5 L/min Mass Flow Controller, Cable, Analogue, 10.8 → 26.4 V dc

  • RS-stocknr. 619-1859
  • Fabrikantnummer D6F-05N2-000
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

MEMS Mass Flow Sensor

Compact, intelligent sensors featuring MEMS technology for precision mass airflow and LNG measurement.

Precision unidirectional mass airflow
Stable output across full scale
Low power consumption
Joint type: Bamboo with external dia. 7.4mm (min.); 8.6mm (max.) passage diameter 4mm. Except 619-1859 which is an RC 1/4 screw
Supplied with cable, 100mm long
Applications include; Pick & Place systems, industrial processes, oxygen concentrators/conservators, leak detection, spectrososcopy, mass flow controllers, scientific/test equipment, fuel cell control

Warning

  • Air to be measured needs to be dry and free of large particles e.g. dust, oil, mist

Warning

  • Air to be measured needs to be dry and free of large particles e.g. dust, oil, mist
Specificaties
Kenmerk Waarde
Maximum Flow Rate 0 → 5 L/min
Electrical Connection Cable
Control Output Analogue
Mounting Style Compact
Supply Voltage 10.8 → 26.4 V dc
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
371,19
(excl. BTW)
449,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
371,19 €
Related Products
Working on the calorimetric principle these sensors have ...
Description:
Working on the calorimetric principle these sensors have a working range of 1 to 10m/sec (air velocity) and can be set to give an output signal should the airflow drop below the preset level. Suitable for monitoring in HVAC applicationsLED ...
Compact flow indicator using microprocessor technologyFast reaction time ...
Description:
Compact flow indicator using microprocessor technologyFast reaction time (1 → 2 sec)Adaptable to various process connectionsAutomatic adjustment to nominal flow and minimum flow via setting buttons or programming lineAll parameters can also be set manuallyLocking facilityOptical indication of nominal flow, ...
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
The principle of operation is when a liquid ...
Description:
The principle of operation is when a liquid flows through the pipe, the paddle wheel in the fitting (S030 Flow Adaptor -available separately) is set in rotation inducing a measuring frequency in the transducer, which is proportional to the flow. ...