Floor Standing Enclosure, Single Door, Sheet Steel, Grey, 2000 x 800 x 600mm IP55 SE8

  • RS-stocknr. 773-0486
  • Fabrikantnummer 5834500
  • Fabrikant Rittal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

SE8 Floor Standing Enclosure

The body of the SE8 floor standing enclosure consists of two side panels and a roof made from a single piece of sheet steel, unlike bayed enclosure suites that have frames and removable side panels. The rear panel of the enclosure is screwed on for easy access and cable entry and can be handled in a variety of ways using the integrated base frame. The Rittal TS frame is integrated into the body of the enclosure enabling the SE8 to accept all standard TS8 accessories including chassis, mounting panels, handles, fan/filter units and cable handling options. The door and rear wall of the SE8 are electrically bonded to the enclosure using a patented hardware system that requires no separate ground straps. The two mounting levels integrated into this floor standing enclosure provide more room for options, making better use of space while reducing installation time.

Highly stable thanks to self-supporting, integrated frame construction
Installation does not require prior assembly of side or rear panels
Automatic potential equalization
Optimum cable entry points
Two level mounting approach
Protection category from IP55 to EN 60529, complies with NEMA 12
Standard door hinged on the right can be changed to the left
Enclosed basic frame helps to reduce debris and dirt collection making cleaning easier
Dipcoat primed and powder coated on the outside with light grey RAL 7035 textured paint
Mounting plate is zinc-plated
Enclosure depths of 400, 500 and 600mm
Enclosure widths ranging from 600 to 1800mm
Carbon steel - UL/cUL Type 12 (IP55 to EN 60529)

Approvals

UL, CSA and CE.

Supplied with

Enclosure with 1 door: door hinged on the right (can be changed to the left), mounting plate, gland plates, rear panel screw-fastened from the inside.
Enclosure with 2 doors: overlapping, lockable door with r/h hinge, mounting plate, gland plates, rear panel, screw-fastened from the inside, in two pieces from a width of 1600 mm.

Steel Floor Standing Enclosures

Specificaties
Kenmerk Waarde
Number of Doors 1
IP Rating IP55
Series SE8
Door Type Opaque
Construction Type Welded
Body Material Sheet Steel
Colour Grey
External Dimensions 2000 x 800 x 600mm
External Depth 600mm
External Height 2000 mm
External Width 800 mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
745,50
(excl. BTW)
902,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
745,50 €
Related Products
A range of internal doors for use with ...
Description:
A range of internal doors for use with Spacial CRN, S3D and S3X enclosures. • Sheet steel with a grey (RAL 7035) polyester powder finish• 3 mm double bar lock• Reversible• Maximum load 30 kg/m²• Green premium product• RoHS compliant. ...
Locking system with escutcheon and 5mm double bar ...
Description:
Locking system with escutcheon and 5mm double bar insertProtection degree IP65 according to IEC 60529IK10 resistance to external mechanical impact according to EN 50 102Reversible door, 120° opening. Maximum permissible loading: 30kg/m2Temperature Resistant: -50°C to +150°CSelf ExtinguishingDirect fixing to the ...
The Thalassa PLD enclosure is designed to accommodate ...
Description:
The Thalassa PLD enclosure is designed to accommodate busbars and 3 pole DIN block fuses in energy distribution applications. IP43 (IEC529)GRP enclosures resistant to impact, temperature and corrosion3-point locking door system (keylock not included), opens to 90° (lift-off hinges allow ...
The Spacial SM compact metal enclosure is made ...
Description:
The Spacial SM compact metal enclosure is made up of a compact body, welded rear panel and front part forming a rigid frame with its corners welded. Four deep supports, 2 at the top and 2 at the bottom, for ...