Fan Filter, Fan Mounted 120 x 120mm, for 120mm Fan Aluminium, Stainless Steel

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Wire Mesh Guards

Corrugated mesh filters which allow high levels of air passage while efficiently filtering contaminants and acting as a EMI/RFI shield

*This product is undergoing a branding transition so you may receive dual branding products. Both versions are exactly the same and work to the same spec*

The dust has many definitions, but we can describe it as a dry powder consisting of little particles, which quite often irritates an eye and can-do harm to your appliances. To lifespan, your application and increase comfort and safety, we are recommending using Fan Filters. They intend it is to get rid of any dust or tiny particles from the airflow of the Fan. This simple mechanism helps with the free movement of air and protects the Fan from any internal damage. The Fan Filter Unit (FFU) knows as Dust Filter is an accessory that is used in fans and blowers by many users worldwide. The typical filter consists of four parts, such as the outer cover or frame, filter pad, mesh screen and finger guard. The Fan Filters are available in various shapes, styles and materials. The selection of a Fan depends on the size and type of Fan and environment. Some of the attributes, such as frame size, frame material, filter type or filter material analysis, should take place. Fans and Filters have their well-established position in almost every industry where the temperature is developing, and the machinery or components around it must be kept cold. From Motors, CNC and welding machines, office equipment to Laboratories where clean air is essential. We are proudly introducing our own branded RS PRO Aluminium/Stainless Steel Fan Filter for fan size of 120 mm. Corrugated mesh filters (30 x 30, 3/16 pitch, 1/8 deep) allow high levels of air going through while efficiently filtering contaminants and acting as an EMI (Electromagnetic Interference)/FRI (Radio Frequency Interference) shield. These solutions reduce electric signal integrity and strength to safeguard the functionality of your device. These Filters may be mounted directly onto the Fan or to any other housing. This is a precision Fan speed controller with vent cooling system meaning it is a must-have part that goes with your application.

Features and Benefits

  • Dust Filter dimensions are L 120 x W 120 mm

  • This is aluminium/stainless steel filter characterising of a high level of air passage while efficiently filtering contaminants and shielding EMI/RFI

  • Mesh screen (30 x 30, 3/16 pitch, 1/8 deep)

  • These Filters can be mounted either directly onto the Fan or other housing

  • The Stainless-Steel Fan comes with 3-year Warranty

  • The foam Filter is cleanable and washable

Application

The most common uses are:

  • Electrical control cabinets

  • Motors

  • Data cabinets

  • Laboratories

  • CNC and welding machines

  • Office equipment (projectors, laptops etc.)

  • Server racks

Why RS PRO?

RS Pro is our family brand and brings you a wide range of high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we're confident of their exceptional quality, which means you can be convinced too.

Specificaties
Kenmerk Waarde
Filter Type Fan Mounted Filter
Fan Size 120mm
Dimensions 120 x 120mm
Thickness 4.5mm
Frame Finish Black Anodized
Filter Material Aluminium, Stainless Steel
Length 120mm
Width 120mm
70 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1220 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
Was 8,97 €
8,072
(excl. BTW)
9,767
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
8,072 €
80,72 €
100 - 240
6,651 €
66,51 €
250 - 490
5,585 €
55,85 €
500 - 990
4,875 €
48,75 €
1000 +
4,52 €
45,20 €
*prijsindicatie
Related Products
The complete fan filter sets include finger guard, ...
Description:
The complete fan filter sets include finger guard, filter cover, mesh filter and felt filter. Replacement filters are available separately. Assembly depth 12.5mm.
The ebm-papst EMC screen filter combines RFI screening ...
Description:
The ebm-papst EMC screen filter combines RFI screening with mechanical finger guard protection. It is designed to fit directly over the fan without any noticeable reduction in airflow or an increase in fan noise. The screen features a welded mesh ...
The ebm-papst coarse filter is made of stainless ...
Description:
The ebm-papst coarse filter is made of stainless steel as inserted wire mesh. The filter is available with a length of 119mm and width of 119mm. It is suitable for 119mm and 119mm fan size. ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007UL ...
The ebm-papst fan filter replacement pad achieves a ...
Description:
The ebm-papst fan filter replacement pad achieves a 75% dust particle retention down. It has a size of 5-10 microns and can withstand temperatures of up to 100⁰C. It is made of synthetic fibre. The pad is flame resistant and ...