4 Way Through Hole DIP Switch 4P

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity ADE and ADF Series DIP Switches

ADE and ADF series through hole mounting 7.5 x 3.5mm DIP switches with a 2.54mm centerline, gold flash plated contacts and black PPS housings. The ADE series DIP switches have extended slide actuators whilst the ADF series DIP switcheshave flush slide actuators. Both versions of these DIP switches have a high pressure contact system and are auto insertable.

High pressure wiping contact allows aqueous or solvent cleaning without tape seal
Can withstand vapour phase reflow or wave soldering conditions
Contact resistance: 50mΩ

Note

Unless stated otherwise, these switches are not suitable for immersion cleaning

Specificaties
Kenmerk Waarde
Contact Configuration 4P
Contact Current Rating 100 mA@ 24 V dc
Contact Material Gold over Nickel Plated Copper Alloy
Number of Positions 4
Mounting Type Through Hole
Actuator Type Slide
Package Style DIP
Maximum Operating Temperature +85°C
Minimum Operating Temperature -30°C
Operating Temperature Range -30 → +85°C
27 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
686 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
0,82
(excl. BTW)
0,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
0,82 €
Verpakkingsopties
Related Products
Connector, High contact reliability, Long stroke of 7.5mm. ...
Description:
Connector, High contact reliability, Long stroke of 7.5mm. High contact reliability:The contact part has a self-cleaning function.Long Stroke:Full strokeʹ7.5mmSnap-in Panel MountingConnector Socket:The terminal section can be one touch to the contactor.This can shortener lead wire installation time.
A range of low cost PCB mount rotary ...
Description:
A range of low cost PCB mount rotary DIP switches. Series includes top or side actuator with flat or spindle shaft models. Rotor has an O-ring sealed construction that prevents the ingress of dirt and dust (IP60)RoHS compliant10 or 16 ...
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
Push’ switches which rely for their operation on ...
Description:
Push’ switches which rely for their operation on the Piezo-electric effect. Pressure on the operating face creates a Piezo signal voltage which is internally amplified and conditioned to provide a short electrical pulse. This effects a momentary ’contact closure’ of ...