Schneider Electric Switch Mode DIN Rail Power Supply 380 → 500V ac Input, 24V dc Output, 20A 480W
- RS-stocknr.:
- 815-3111
- Fabrikantnummer:
- ABL8WPS24200
- Fabrikant:
- Schneider Electric
Bekijk alle DIN Rail Power Supplies
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/11/2022, met een levertijd van 1 werkdag.
Prijs Each
377,28 €
(excl. BTW)
456,51 €
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | 377,28 € |
- RS-stocknr.:
- 815-3111
- Fabrikantnummer:
- ABL8WPS24200
- Fabrikant:
- Schneider Electric
Datasheets
Wetgeving en conformiteit
Productomschrijving
ABL 8WPS series power supplies
Compact three-phased power supplies, equipped with a harmonic filter, are intended to provide the DC voltage necessary for the control circuitry of automation equipment.
They deliver a voltage with an accuracy of 3%, regardless of the load, in the 340 to 550 V range.
They have a power reserve that allow them to deliver a current of 1.5 In at regular intervals, thus allowing the supply to be oversized if equipment has a high inrush current.
The diagnostics are indicated on the front face of the product by LEDs (Uout and Iout) and by floating relay contact (automation states guaranteed or not).
All products are equipped with an output voltage adjustment potentiometer to allow any drops in line voltage to be compensated for.
These power supplies are intended for direct mounting on a 35 mm DIN rail mount.
They deliver a voltage with an accuracy of 3%, regardless of the load, in the 340 to 550 V range.
They have a power reserve that allow them to deliver a current of 1.5 In at regular intervals, thus allowing the supply to be oversized if equipment has a high inrush current.
The diagnostics are indicated on the front face of the product by LEDs (Uout and Iout) and by floating relay contact (automation states guaranteed or not).
All products are equipped with an output voltage adjustment potentiometer to allow any drops in line voltage to be compensated for.
These power supplies are intended for direct mounting on a 35 mm DIN rail mount.
Specificaties
| Kenmerk | Waarde |
| AC or DC Input Voltage | ac |
| AC or DC Output Voltage | dc |
| Input Voltage | 380 → 500V ac |
| Output Voltage | 24V dc |
| Output Current | 20A |
| Power Rating | 480W |
| Number of Outputs | 1 |
| Electrical Phase | 3 |
| Type | Switch Mode |
| Height | 143mm |
| Mounting Type | DIN Rail Mount |
| Width | 95mm |
| Depth | 155mm |
| Maximum Temperature | +60°C |
| Ripple And Noise | <=200mV |
| Load Regulation | 1 → 3% |
| Minimum Temperature | -25°C |