Schneider Electric iEM3100 LCD Digital Power Meter, 10-Digits, 1, 3 Phase

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Acti9 iEM3100 Energy Meters

The iME3100 energy measurement counter is used to measure the active energy consumed by single-phase, three-phase or three-phase + neutral type electrical circuits.

Operating voltage: 3 x 100/173 Vac (50/60 Hz) → 3 x 277/480 Vac (50/60 Hz)
Imax: 63 A
IP40 front panel, IP20 casing
Overvoltage and measurement category III, degree of pollution 2
Electromagnetic environmental class: E2
Mechanical environmental class: M1
Operating temperature: -25 → + 55 °C

Models:

iEM3100: kWh meter with partial counter
iEM3110: kWh meter with partial counter and pulse output. MID certified
iEM3115: multi-tariff meter controlled by digital input or internal clock, MID certified
iEM3150: kWh meter with partial counter and current, voltage, power measurement. Modbus communication
iEM3155: energy meter, four quadrant, multi-tariffs with partial counter and current, voltage, power measurement, Modbus communication, digital I/O, MID certified

Standards

IEC 61557-12, IEC 62053-21

Specificaties
Kenmerk Waarde
Display Type LCD
Number of Digits 10
Number of Phases 1, 3
Depth 69mm
Minimum Temperature -20°C
Series iEM3100
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 05/12/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
312,70
(excl. BTW)
378,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
312,70 €
Related Products
The ULYS TD80 is an energy meter designed ...
Description:
The ULYS TD80 is an energy meter designed for energy management applications and is used locally on its own screen or remotely via integrated communication. It is quick and simple to program and is also available as a MID certified ...
Three Phase, Multifunction Dual tariff energy meters Bi-directional, ...
Description:
Three Phase, Multifunction Dual tariff energy meters Bi-directional, with M-Bus integrated interface, single SO output and backlit LCD display for 3 or 4 wire systems. Display of total or partial (resettable) energy consumption: kWh, kVAh or kvarh - for both ...
The B24 series meters are high runner meters ...
Description:
The B24 series meters are high runner meters for many applications and installations. Navigating the meter is easily done via the push-buttons below the display.Data from the B series meters can be collected via pulse output or serial communication.All meters ...
DMG 600 and DMG 610 digital multimeter are ...
Description:
DMG 600 and DMG 610 digital multimeter are capable of viewing the measurements with high accuracy on the wide graphic LCD, which allow to control energy distribution networks. Easy and intuitive menu navigationLCD display with text in 5 languagesExpandability with ...