TE Connectivity HDP Thermoplastic Right Angle, Straight D-sub Connector Backshell, 50 Way

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

AMPLIMITE D-Sub Connector, HDP Series, 45/180° Clam Shell Backshell

AMPLIMITE D-Sub Connector, HDP Series, 45/180° unshielded hinged clam shell type cable clamps made from black thermoplastic for use with AMPLIMITE HDP metal shell plug and receptacle d-sub connectors. These AMPLIMITE D-Sub unshielded cable clamp backshells are supplied with 6-32 self tapping pan head screws and are available with a short clam shell length (stock numbers 782-6165 and 822-5030) or a long clam shell length (782-6177 and 782-9820).
Stock number 782-6165 is for use with a shell size 2 HDP Series metal shell d-sub connector and accepts a cable insulation diameter of 8.13mm
Stock number 822-5030 is for use with a shell size 3 HDP Series metal shell d-sub connector and accepts a cable insulation diameter of 10.67mm
Stock number 782-6177 is for use with a shell size 4 HDP Series metal shell d-sub connector and accepts a cable insulation diameter of 12.45mm
Stock number 782-9820 is for use with a shell size 5 HDP Series metal shell d-sub connector and accepts a cable insulation diameter of 15.24mm

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 50
D-Sub Shell Size D
Housing Material Thermoplastic
Body Orientation Right Angle, Straight
Series HDP
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21/12/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
4,88
(excl. BTW)
5,90
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
4,88 €
10 - 24
4,69 €
25 - 49
4,10 €
50 - 149
4,00 €
150 +
3,91 €
Related Products
Our reliable AMPLIMITE D-sub .050 series connector portfolio ...
Description:
Our reliable AMPLIMITE D-sub .050 series connector portfolio offers a high density D type interface and includes right angle and vertical D-subs. Both versions have three mating faces available, flat face, latch block and latch block with rails. Plug and ...
These backshells are ideally suited for use with ...
Description:
These backshells are ideally suited for use with ITT Cannon D*JK filter 'D' connectorsThey provide an excellent solution for the D*W series as depth of the shell accommodates the extended insulator length of this rangeEMI/RFI shielding obtained with integrated shielding ...
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
AMPLIMITE .050 series III shielded SCSI (50 and ...
Description:
AMPLIMITE .050 series III shielded SCSI (50 and 68 way) d-sub backshell kits consisting of and upper and lower backshell made from from zinc with nickel over copper plating, 2 x stainless steel spring latches, stainless steel 2-56 screws and ...