Peak DCA55 Component & IC Tester Component, Model DCA55

  • RS-stocknr. 410-0176
  • Fabrikantnummer DCA55
  • Fabrikant Peak
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Component Analyser DCA55

An intelligent component analyser (70 x 103 x 20mm) that can analyse a vast number of different component types including bipolar transistors, MOSFETs, thyristors, triacs, diodes, LEDs and others. It provides information such as component type, pin out and measurable parameters (such as gain, gate threshold voltages, voltage drops etc).

Identification of diode networks such as common anode, common cathode, series and inverse parallel types
Scrollable pages of information
Identification of special component features such as diode protection or resistor shunts on transistors
Identification of different LED types such as two or three terminal bicolour types

Automatic component identification
Automatic pin out identification
Measurement of transistor gain from 2 to 65000
Measurement of MOSFET gate thresholds
Measurement of semiconductor voltage drops for transistors, diodes and LEDs
Auto and manual power off

Parameter Min. Nom. Max. Units
Peak test current into short circuit (Isc) -5.5   5.5 mA
Peak test voltage across open circuit (Voc) -5.0   5.0 V
Bipolar transistor collector test current (Ic) 2.3 2.5 2.7 mA
Bipolar transistor collector-emitter test voltage (Vceo) 2.0   3.0 V
Bipolar transistor measurable gain (Hfe) 4   65000 -
Bipolar gain accuracy ± 3% of reading ± 5 Hfe      
EM MOSFET Min. Nom. Max. Units
drain test current (Id)   2.5   mA
drain-source test voltage (Vds) 2.0   3.0 V
gate-source voltage range (Vgs) 0   5.0 mA
gate-source threshold accuracy   4   %
Silicon diode junction test current (If) 3.3 4.4 5.0 mA
Triac/Thyristor gate current (Ig)   4.5   mA
Triac/Thyristor test current   4.5   mA

Component Analyser DCA55

Specificaties
Kenmerk Waarde
Tester Type Component
Battery Type GP23A
Power Source Battery
Dimensions 103 x 70 x 20mm
Height 20mm
Length 103mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p DCA55
Width 70mm
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
54 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
77,15
(excl. BTW)
93,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
77,15 €
Related Products
A low cost, battery powered component tester with ...
Description:
A low cost, battery powered component tester with a 3 digit LCD display and a maximum reading of 1999. Making it ideal for use in field service and production environments. Tests: Batteries, diodes, LEDs, transistors & SCRsMeasures resistance and capacitanceLow ...
RS SMD-100 has a changeable head for automatic ...
Description:
RS SMD-100 has a changeable head for automatic scan check DC/AC Voltage, components (resistance, capacitance, diode and continuity) and circuit fault. All inputs are protected according to EN 610101-1 CATIII 600V. Automatic DCV or ACV selection, Capacitance, Resistance, Continuity and ...
The Atlas SCR will identify the device type, ...
Description:
The Atlas SCR will identify the device type, display the pinout and measure gate sensitivity. Connect any way roundThyristor and Triac identificationAutomatic pinout identificationGate sensitivity checking from 100uA to 90mALoad current test up to 100mAShorted junction testingAuto power on and ...
LEAPER-1A is a portable IC Tester that is ...
Description:
LEAPER-1A is a portable IC Tester that is designed for digital ICs. No PC is required to operate LEAPER-1A, it works complete in a stand-alone mode through power adaptor or batteries. Easy-operating, particularly designed for the digital ICsSupport low voltage ...