Sefram MW3366 Clamp Meter, 600A dc, Max Current 600A ac CAT III 600V and CAT IV 300V With UKAS Calibration
- RS-stocknr.:
- 286-4586
- Fabrikantnummer:
- MW3366
- Fabrikant:
- Sefram
Sorry, we konden onze voorraadniveaus nu niet controleren. Probeer de pagina te vernieuwen.
Prijs Per stuk
€ 297,00
(excl. BTW)
€ 359,37
(incl. BTW)
Aantal stuks | Per stuk |
---|---|
1 + | € 297,00 |
- RS-stocknr.:
- 286-4586
- Fabrikantnummer:
- MW3366
- Fabrikant:
- Sefram
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- TW
Productomschrijving
The Sefram multimeter clamp is an essential addition to any toolbox, offering multifunctional capabilities for TRMS AC+DC measurements in both current and voltage. It supports current measurements up to 600A with two sensitivities for accurate readings even at low currents. Additionally, it can measure AC and DC voltages up to 600V. Advanced functions include frequency, resistance (up to 40MΩ), capacitance (up to 2000μF), continuity, and temperature measurements, catering to various inspection and troubleshooting requirements.
Current measurement up to 600A TRMS AC + DC
Voltage measurement up to 600V TRMS AC + DC
Voltage measurement on Variable Frequency Drives (VFD) up to 600V
Low current measurement AC + DC function
Frequency measurement up to 400Hz
Resistance measurement up to 40 MΩ
Capacitance measurement up to 2500μF
Diode testing
Continuity function with buzzer
Jaw opening of 35mm maximum
Non-Contact voltage detection (Electric Field detection)
Auto-ranging mode
Backlighted LCD display
Auto-Power-Off mode after 32 minutes of inactivity
Capture Peak RMS 80 ms mode for inrush currents
Relative-zero mode (offset)
Function HOLD
6000 counts display
Safety 1000V AC/DC - CAT IV and 1500V DC CATIII
Provided with test leads
Voltage measurement up to 600V TRMS AC + DC
Voltage measurement on Variable Frequency Drives (VFD) up to 600V
Low current measurement AC + DC function
Frequency measurement up to 400Hz
Resistance measurement up to 40 MΩ
Capacitance measurement up to 2500μF
Diode testing
Continuity function with buzzer
Jaw opening of 35mm maximum
Non-Contact voltage detection (Electric Field detection)
Auto-ranging mode
Backlighted LCD display
Auto-Power-Off mode after 32 minutes of inactivity
Capture Peak RMS 80 ms mode for inrush currents
Relative-zero mode (offset)
Function HOLD
6000 counts display
Safety 1000V AC/DC - CAT IV and 1500V DC CATIII
Provided with test leads
Specificaties
Kenmerk | Waarde |
---|---|
Absolute Maximum AC Current Measurement | 600A ac |
Absolute Maximum DC Current Measurement | 600A dc |
Absolute Maximum AC Voltage Measurement | 600V ac |
Absolute Maximum DC Voltage Measurement | 600V dc |
Model Number | MW3366 |
Calibrated | UKAS |
Safety Category | CAT III 600V and CAT IV 300V |