Eaton 630mA F Glass Cartridge Fuse, 5 x 20mm
- RS-stocknr.:
- 169-9406
- Fabrikantnummer:
- S500-630-R
- Fabrikant:
- Eaton
Prijs 1 zak met 1000**
€ 102,89
(excl. BTW)
€ 124,50
(incl. BTW)
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02/06/2025, met een levertijd van 2 à 3 werkdagen.*
* Bezorgdata kunnen veranderen afhankelijk van de gekozen hoeveelheid en het bezorgadres.
GRATIS bezorging voor bestellingen vanaf 75,00 €
Zak(ken) | Per Zak | Per stuk** |
---|---|---|
1 + | € 102,89 | € 0,103 |
**prijsindicatie
- RS-stocknr.:
- 169-9406
- Fabrikantnummer:
- S500-630-R
- Fabrikant:
- Eaton
- Land van herkomst:
- CN
Eaton Bussmann Quick Acting (F) LBC Cartridge Fuses - Glass Bodied, 5 x 20 mm
This range of cylindrical cartridge fuses from Eaton Bussmann is designed to International (IEC) Standards for use globally. It is available in cartridge and axial lead form. They are ideal for providing protection to devices or internal circuits from short circuits and overcurrent. They are deliberately weaker components which, when too much current is drawn, will blow. Once the fuse has blown it will need replacing in order to make the circuit complete and allow the flow of current.
Why choose a glass cartridge fuse?
Glass and ceramic fuses have similar properties. However, you may choose a glass cartridge fuse as it enables you to see the inside of the fuse. Therefore it is easier to determine whether the fuse has blown.
What size is it?
5 mm x 20 mm is a standard cartridge size and it measures approximately 20 mm long by 5 mm in diameter. They are popular in board and panel protection and will fit a compatible 5 x 20 mm fuse holder.
What Speed is it?
This particular fuse is type ''F'' speed-rated which means a fast-acting fuse. These are designed to protect less sensitive components and are also used to protect the cabling from melting or catching fire when an overload appear. Every fast-acting fuse will have the exact speed stated which will be relevant to different overloads.
What voltage is it?
These cartridge fuses are available with 40 mA to 10 Amp current ratings for applications where the system voltage rating is 250 Volts AC.
What is an over-current?
It is a setting where a circuit experiences a current that is higher than the normal operating current.
What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular cartridge fuse is LBC (Low Breaking Capacity).
What are cartridge fuses used for?
• For the protection of components and equipment from costly damage used by over-current
• To isolate sub-systems from the main system once a fault has appeared
Glass and ceramic fuses have similar properties. However, you may choose a glass cartridge fuse as it enables you to see the inside of the fuse. Therefore it is easier to determine whether the fuse has blown.
What size is it?
5 mm x 20 mm is a standard cartridge size and it measures approximately 20 mm long by 5 mm in diameter. They are popular in board and panel protection and will fit a compatible 5 x 20 mm fuse holder.
What Speed is it?
This particular fuse is type ''F'' speed-rated which means a fast-acting fuse. These are designed to protect less sensitive components and are also used to protect the cabling from melting or catching fire when an overload appear. Every fast-acting fuse will have the exact speed stated which will be relevant to different overloads.
What voltage is it?
These cartridge fuses are available with 40 mA to 10 Amp current ratings for applications where the system voltage rating is 250 Volts AC.
What is an over-current?
It is a setting where a circuit experiences a current that is higher than the normal operating current.
What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular cartridge fuse is LBC (Low Breaking Capacity).
What are cartridge fuses used for?
• For the protection of components and equipment from costly damage used by over-current
• To isolate sub-systems from the main system once a fault has appeared
Eaton Cartridge Fuse, 630mA Current Rating, 5 x 20mm Fuse size - S500-630-R
This fast-acting glass tube fuse from the S500 series offers a maximum voltage rating of 250 V AC at a 35A interrupting capacity. With a cold resistance of just 0.20 Ohms, this fuse ensures minimal energy loss. It supports a wide operating temperature range from -40°C to +125°C, making it suitable for various environmental conditions.
Features & Benefits
• Fast-acting design minimises potential damage during overloads
• Glass body facilitates visual inspection of fuse condition
• Complies with IEC 60127-2/2 standards for reliability
• Optional axial leads available for flexible installation
• Offers low breaking capacity for enhanced safety
• Compact design ideal for applications with space constraints
• Glass body facilitates visual inspection of fuse condition
• Complies with IEC 60127-2/2 standards for reliability
• Optional axial leads available for flexible installation
• Offers low breaking capacity for enhanced safety
• Compact design ideal for applications with space constraints
Applications
• Used in automation systems requiring circuit protection
• Employed in electronic devices and machinery for safeguarding electrical components
• Ideal for machinery requiring fuse protection
• Suitable for power supply systems in confined spaces
• Employed in electronic devices and machinery for safeguarding electrical components
• Ideal for machinery requiring fuse protection
• Suitable for power supply systems in confined spaces
Will it meet international safety standards?
Yes, it complies with various international agency approvals.
What does the cold resistance value indicate?
The cold resistance reflects the resistance at zero current, which helps minimise power loss during operation.
Can this fuse be used for axial lead applications?
Yes, the fuse includes an option for axial leads to facilitate easier installation.
Note
Eaton formerly known as Bussmann
Approvals
UL, BSI, VDE, SEMKO, IMQ
Kenmerk | Waarde |
---|---|
Current Rating | 630mA |
Fuse Size | 5 x 20mm |
Fuse Speed | F |
Voltage Rating | 250V ac |
Body Material | Glass |
Fuse Standard | IEC 60127-2 |