Legrand Cantilever Arm Bracket Pre-Galvanised Steel Cable Tray Fixing Plate, 100 mm Width, 74mm Depth

  • RS-stocknr. 163-3069
  • Fabrikantnummer LCA100PG
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specificaties
Kenmerk Waarde
Accessory Type Cantilever Arm Bracket
Material Pre-Galvanised Steel
Duty Type Heavy Duty, Light Duty, Medium Duty
Depth 74mm
Series LCA
Width 100 mm
Tray and Basket Type Cable Tray
For Use With Flat Surface Tray, Swiftrack Channel
18 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,58
(excl. BTW)
10,38
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
8,58 €
10 +
7,72 €
Related Products
Cantilever arms are for universal mounting and used ...
Description:
Cantilever arms are for universal mounting and used to support steel wire cable trays. The arms are wall mounted or use channel and EDF mounting rails. Quick and easy to use. Cantilever armsCompactUniversal mountingWall, Channel and EDF mountsSupport steel wire ...
The Cablofil International compact cantilever arm cable tray ...
Description:
The Cablofil International compact cantilever arm cable tray is a universal mounting arm from the CM series. It is made of 316 stainless steel material. This arm is compact, easy to use. • Medium duty• Provides corrosion protection• Support steel ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It is made of 316 stainless steel material and is 100mm wide. It used in pairs on side rails for steel cable tray. Plated with ecologic zinc, ...
Pre-galvanised medium duty couplersCouplers are required for joining ...
Description:
Pre-galvanised medium duty couplersCouplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drillingMRFC standard couplers are supplied in pairsMRFC standard coupler is supplied singly.