Legrand Cantilever Arm Bracket Pre-Galvanised Steel Cable Tray Fixing Plate, 75 mm Width, 65mm Depth

  • RS-stocknr. 163-3068
  • Fabrikantnummer LCA75PG
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specificaties
Kenmerk Waarde
Accessory Type Cantilever Arm Bracket
Material Pre-Galvanised Steel
Depth 65mm
Series LCA
Tray and Basket Type Cable Tray
Width 75 mm
For Use With Flat Surface Tray, Swiftrack Channel
Duty Type Heavy Duty, Light Duty, Medium Duty
45 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
4,29
(excl. BTW)
5,19
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
4,29 €
10 +
3,86 €
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
The Cablofil International compact cantilever arm cable tray ...
Description:
The Cablofil International compact cantilever arm cable tray is a universal mounting arm from the CM series. It is made of 316 stainless steel material. This arm is compact, easy to use. • Medium duty• Provides corrosion protection• Support steel ...
Cantilever arms are for universal mounting and used ...
Description:
Cantilever arms are for universal mounting and used to support steel wire cable trays. The arms are wall mounted or use channel and EDF mounting rails. Quick and easy to use. Cantilever armsCompactUniversal mountingWall, Channel and EDF mountsSupport steel wire ...
The Legrand cantilever arm is a cable tray ...
Description:
The Legrand cantilever arm is a cable tray from the LCA series. It provides bracket for cable support system. The housing of tray is made of stainless steel material. This enable horizontal runs of cable tray to be mounted to ...