TE Connectivity Heat Shrink Cable Marker, Pre-printed 1 White 4 → 12mm Dia. Range

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Heatshrink Pre-Printed Cable Markers

Irradiated polyolefin heat-shrinkable cable markers which shrink to 33% of their supplied diameter when heated above 120°C. The legends are printed in black against a white background, thus giving clear identification even under poor lighting conditions. The cable markers are highly flame-retardant to ASTM B876 (burn time more than 5 seconds).

Features and Benefits

• Three sizes are available;
- Size 3//1: Nominal internal diameter 3 mm
- Size 6//2: Nominal internal diameter 6 mm
- Size 12//4: Nominal internal diameter 12 mm
• Continuous temperature range -55°C to +135°C (+300°C for short periods)
• 3:1 shrink ratio
• Easily and rapidly installed
• Good resistance to common fluids

Specificaties
Kenmerk Waarde
Affixing Method Heat Shrink
Legend 1
Minimum Cable Diameter 4mm
Maximum Cable Diameter 12mm
Colour White
Quantity 100
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +135°C
Resistant To Flame, Fluid
Cable Diameter Range 4 → 12mm
Operating Temperature Range -55 → +135 °C
Tensile Strength 5MPa
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
127 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 100
5,44
(excl. BTW)
6,58
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
5,44 €
0,054 €
15 - 49
5,14 €
0,051 €
50 +
4,88 €
0,049 €
*prijsindicatie
Related Products
UV-stabilised, high temperature wire and cable marker tags ...
Description:
UV-stabilised, high temperature wire and cable marker tags for thermal transfer printers. Secure to bundles using cable ties up to 4.7mm width maximum. Features and benefits• Manufactured from tough and flexible material• Suitable for use with cable ties up to ...
Presented on an A4 sheet to feed through ...
Description:
Presented on an A4 sheet to feed through laser printersRecommended for applications requiring high temperature, abrasion and chemical resistanceOperating temperature -40°C to +120°CSupplied in bags of 10 A4 sheets.
Heatshrinkable sleeves in polyolefin material allowing the marking ...
Description:
Heatshrinkable sleeves in polyolefin material allowing the marking of wires and cables before or during cabling. • One sided printable• Applications include: Wire and cable marking and panel identification• Matte finish• Compatible with TLS 2200, TLS-PC Link, BMP71• Heat-shrinkable• ...
Continuous 3:1 heatshrink printable tubing for thermal transfer ...
Description:
Continuous 3:1 heatshrink printable tubing for thermal transfer printers. Self-extinguishingHighly flexible cable range 24mm to 1mmSupplied on individual reels in a convenient boxLength stated is per reel not total lengthFor use with heatshrink ribbons, TTRC+ and TTDTHOUT.