2 Hole Flange Bearing Unit, PSFT25CR, 25mm ID
- RS-stocknr.:
- 232-8710
- Fabrikantnummer:
- PSFT25CR
- Fabrikant:
- NSK-RHP
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 83,95
(excl. BTW)
€ 101,58
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 83,95 |
| 5 - 9 | € 80,60 |
| 10 - 24 | € 78,91 |
| 25 + | € 77,23 |
- RS-stocknr.:
- 232-8710
- Fabrikantnummer:
- PSFT25CR
- Fabrikant:
- NSK-RHP
Wetgeving en conformiteit
N.v.t.
Productomschrijving
Corrosion Resistant, Self-lube Bearings
Designed specifically for use in industries where frequent thorough wash downs are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range
Available in pillow block, two and four bolt flange configurations and are capable of accommodating initial misalignment whilst mounting
Re-lubrication is possible through the grease nipple and all units are charged with USDA H1 approved food grade grease as standard
Available in pillow block, two and four bolt flange configurations and are capable of accommodating initial misalignment whilst mounting
Re-lubrication is possible through the grease nipple and all units are charged with USDA H1 approved food grade grease as standard
Two-Bolt Flange Bearings - NSK
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 25mm |
| Bearing Unit Type | Flange Bearing Unit |
| Number of Mount Holes | 2 |
| Material | Stainless Steel |
| Length | 68.4mm |
| Width | 130.3mm |
| Depth | 36.7mm |
| Mount Hole Size | M10 |
| Mount Hole Centre-to-Centre | 99mm |