TE Connectivity AMP SUPERSEAL 1.5 Series, 1 Row 2 Way IP66, IP69K Cable Mount Socket Connector

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

TE Connectivity 1.5 Superseal Series, Connector Housings - AMP Superseal 1.5

Our range of TE Connectivity, PCB Connector Housings form part of the 1.5 superseal series. A typical applications for these types of housings are to provide a receptacle for connectors when they ate mounted to a printed circuit board. These types of fittings are an essential component that offer protection for the connection that it is housing.

Features and Benefits

• Comprised of black 6.6 glass filled poly-amide
• 1 - 6 positions
• Plug housings for receptacle contacts, cap housings and tab contact variants
• Pre-assembled secondary lock
• Silicon rubber seals
• Panel or cable mount
• Temperature range of the 1.5 mm pitch superseal series is of -40 to +125°C
• Suitable for powertrain, security, and body & chassis systems
• Dielectric withstand voltage 1500 Vrms

Note

For Superseal series 1.5 contacts see 314-1334 , and range. For crimp tool see 314-1362 , and for secondary lock extraction tool see 368-4516

For suitable male housings see 314-1205 , and for female housings see 314-1277 , and associated ranges.

TE Connectivity 282080-1

The TE Connectivity 282080-1 is a black plug housing designed for the automotive industry. It features 2 positions with a 6mm centreline pitch and is for use with female terminals. The 282080-1 connector is 15.3mm wide.
The 282080-1 is fitted with a sealing gasket and an anti-blackout device. This provides a warning if the contact is not correctly inserted in the housing, and ensures the gasket does not slip off during un-mating.

Is it waterproof?
Yes the 282080-1 is rated to IP67 and protects from dust and immersion in water up to 1m. This makes the 282080-1 ideal for harsher automotive applications where it may come into contact with water.

What is it made from?
The TE 282080-1 housing is made from polyamide 66 material.

Compatible connector systems:
• Wire-to-Board
• Wire-to-Device
• Wire-to-Wire

TE Connectivity SUPERSEAL Connectors, 1.0 mm and 1.5 mm System

Developed to meet the constantly increasing needs and requirements for safety and reliability in the electrical connection field, these connectors fulfill all the requirements prescribed by the various automotive and industrial standards. Typical applications include various automotive sensor devices, oil pressure senders, water temperature monitoring or any application requiring waterproof protection to IP67.

Features and Benefits

Sturdy and reliable contacts
Double contact spring design
Secondary lock ensures correct and complete insertion of the contact
Silicone rubber seals

Specificaties
Kenmerk Waarde
Number of Contacts 2
Type Connector
Gender Male
Number of Rows 1
Current Rating 14A
Mounting Type Cable Mount
Series AMP Superseal 1.5
Colour Black
IP Rating IP66, IP69K
Termination Method Crimp
Height 9.3mm
Width 15.3mm
Depth 32.2mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Housing Material PA
800 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7200 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Bag of 800)
0,598
(excl. BTW)
0,724
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
800 +
0,598 €
478,40 €
*prijsindicatie
Related Products
From Molex a range of wire to board ...
Description:
From Molex a range of wire to board automotive headers from the stAK50h infotainment system designed to deliver signal and Ethernet in one connection. The header is made up of two bays with 28 connections in each section providing 56 ...
This is a miniature high density connector system ...
Description:
This is a miniature high density connector system offering a wire to wire and wire to board I/O solution commonly used in the automotive industry but suitable for many varying signal transfer applications. Snap in, crimp contacts for cable receptaclesBoard ...
MCP 1.5K/2.8 hybrid sealed PCB headers with both ...
Description:
MCP 1.5K/2.8 hybrid sealed PCB headers with both 1.5mm and 2.8mm CuSn silver plated tab contacts. These plug style PCB header connectors are made from black PBT-GF20 and have type A keying. Stock number 718-3565 is right angle mounting. For ...
The SSC (Sealed Sensor Connector) System has been ...
Description:
The SSC (Sealed Sensor Connector) System has been developed to meet the severe requirements of the automotive under hood connector environment, also suitable for many different severe environmental connector applications. Wire sealing for the SSC (Sealed Sensor Connector) System is ...