Automotive connector accessories are designed to work with and complement our range of Automotive Connectors. This range of accessories is specifically for automotive use, such as cars, caravans, trucks, buses and off-road vehicles. Therefore, they are tough and reliable and often provide extra protection against the environment.
Examples of accessory types:
Backshells protect the connection from mechanical wear and environmental conditions.
Cavity plugs are used to seal or blank off unused connections.
Connector housings are used alongside contacts to create an automotive connector.
Contacts are the metal pieces within the connector which form the electrical connection.
Crimp Terminals are used to terminate wires and are used to create an electrical connection.
Secondary/TPA locks ensure terminal are fixed in the correct position and may provide strain relief.
Wedgelocks fit into the connector to ensure maximum contact retention.
Description:
Also known as TPA (Terminal Postiion Assurance,) these
DT Series connector wedge locks are fitted inside the connector prior to mating and offer a locking mechanism to prevent accidental disconnection of the mated connectors.
Description:
Also known as TPA (Terminal Postiion Assurance,) these
DT Series connector wedge locks are fitted inside the connector prior to mating and offer a locking mechanism to prevent accidental disconnection of the mated connectors.
Description:
This range of mounting clips and retaining clips
are suitable for the Delphi Metri-Pack 150,280,480 and 630 series of automotive connectors.The clips are of press fit design and are made of Nylon.The retaining clip is made from carbon steel.
Description:
Metri-Pack 150 OBD II On-Board diagnostic automotive connectors
designed for under dash applications. These Metri-Pack 150 OBD II On-Board diagnostic automotive connectors are designed to meet SAE J1962 specifications using ISO standard male terminals. The Male test equipment automotive connector ...
