Phoenix Contact 1 Channel Galvanic Barrier, Isolating Amplifier, Current, Voltage Input, Current, Voltage Output, ATEX
- RS-stocknr.:
- 715-7960
- Fabrikantnummer:
- 2811556
- Fabrikant:
- Phoenix Contact
7 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 349,44
(excl. BTW)
€ 422,82
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 349,44 |
- RS-stocknr.:
- 715-7960
- Fabrikantnummer:
- 2811556
- Fabrikant:
- Phoenix Contact
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
Configurable Analogue 3 way Isolation Converter
3 way isolation
Configurable imput and output signals
Long range supply of 19.2Vac/dc to 253Vac/dc
Configurable imput and output signals
Long range supply of 19.2Vac/dc to 253Vac/dc
Phoenix Contact 1-Channel Galvanic Barrier, 100V Maximum Input Voltage, 100mA Maximum Input Current - MACX MCR-UI-UI-SP-NC - 2811556
Install this single-channel galvanic barrier from Phoenix Contact to separate input and output voltages and currents. It also enables power transfers through a field between two circuits that must not be connected. The isolation amplifier provides galvanic separation and eliminates high common-mode voltages for the safe and effective performance of applications. Use it to maintain ground separation between sensors to prevent ground-loop interferences.
This lightweight component weighs only 140g so it won't add unnecessary strain or drag on equipment. Transient circuitry protection detects and channels power surges to safeguard linked applications and prevent costly damage and downtimes. Three-way separation offers optimal safety by isolating the input-to-output, power-to-input and power-to-output electrical signals.
The hardwearing plastic housing resists heat and wear-and-tear so you can confidently use this isolator in environments with temperatures ranging from -20°C to +70°C. It's a suitable choice for power generators, measurement systems and I/O logic devices and controllers.
This lightweight component weighs only 140g so it won't add unnecessary strain or drag on equipment. Transient circuitry protection detects and channels power surges to safeguard linked applications and prevent costly damage and downtimes. Three-way separation offers optimal safety by isolating the input-to-output, power-to-input and power-to-output electrical signals.
The hardwearing plastic housing resists heat and wear-and-tear so you can confidently use this isolator in environments with temperatures ranging from -20°C to +70°C. It's a suitable choice for power generators, measurement systems and I/O logic devices and controllers.
• IP20 (ingress protection) rating indicates the unit is touch-proof to prevent electrical shocks
• CE compliance assures you the product conforms to European safety and quality standards
• ATEX certification indicates suitability for use in harsh and explosive atmospheres
• CE compliance assures you the product conforms to European safety and quality standards
• ATEX certification indicates suitability for use in harsh and explosive atmospheres
Specificaties
Kenmerk | Waarde |
---|---|
Number of Channels | 1 |
Module Type | Isolating Amplifier |
Barrier Type | Galvanic Barrier |
Output Signal Type | Current, Voltage |
Maximum Voltage | 100V |
Interface | HART |
Hazardous Area Certification | ATEX |
Input Signal Type | Current, Voltage |
Safety Current Resistance | 10Ω |
Maximum Operating Temperature | +70°C |
Maximum Current | 100mA |
Minimum Operating Temperature | -20°C |
Supply Voltage | 12 → 24V dc |
Safety Current Maximum | 100mA |
Safety Voltage Maximum | 100 V |
Series | MACX MCR-UI-UI |
Operating Temperature Range | -20 → +70°C |