- RS-stocknr.:
- 679-4805
- Fabrikantnummer:
- 03-06-1023
- Fabrikant:
- Molex
670 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6400 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 10)
€ 0,202
(excl. BTW)
€ 0,244
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
10 - 240 | € 0,202 | € 2,02 |
250 - 990 | € 0,146 | € 1,46 |
1000 - 4990 | € 0,136 | € 1,36 |
5000 - 9990 | € 0,134 | € 1,34 |
10000 + | € 0,129 | € 1,29 |
*prijsindicatie |
- RS-stocknr.:
- 679-4805
- Fabrikantnummer:
- 03-06-1023
- Fabrikant:
- Molex
Wetgeving en conformiteit
Productomschrijving
Plugs
A range of 1.57mm Diameter Standard .062" Pin and Socket Receptacle Housings for use with crimp terminal contacts Series 1560/1561 stock number 178-6907 typical.
Molex Female Connector Housing, 2 Way, 3.68mm Pitch - STANDARD .062" Series - 03-06-1023
Use this connector housing from Molex to attach your pre-crimped wires to a PCB. For versatility, it can accommodate two conductors at the same time. Thanks to a secure lock-to-mating design, you can rely on it for a vibration-resistant connection to the board. A wide operating temperature range between -40°C and +105°C means the unit can withstand challenging environments. Its nylon material is thermal-resistant for safe industrial use and it also insulates the conductor to protect you from electric shocks during handling.
• Light weight of 0.680g so it won't strain the PCB
• Maximum current per contact of 5A for energy-efficient operation
• Straight body orientation for easy front-facing mounting
• Enables wire-to-wire connection without the need for soldering
• Maximum current per contact of 5A for energy-efficient operation
• Straight body orientation for easy front-facing mounting
• Enables wire-to-wire connection without the need for soldering
Applications
• Control panels
• Industrial automation systems
• Robotics
• Medical technology
• Industrial automation systems
• Robotics
• Medical technology
How do I attach a terminal to this connector?
To attach a terminal to this connector, first strip off the outer jacket of the wire. Insert the stripped end into the compatible crimp contact (178-6907) and use a crimp tool to fasten them together. You can then insert the crimped terminal into this connector.
Molex 1625 Series (0.062in./1.57mm)
A range of Molex Standard .062" products that are suitable for either Power or Signal applications. Housings of the Standard .062" system are polarized and locking is by passive (friction) lock between the plug and the socket via a projection moulded on to the socket. The Standard .062" system housings take male or female round crimp terminals which allows for orientation in any direction.
Specificaties
Kenmerk | Waarde |
---|---|
Number of Contacts | 2 |
Number of Rows | 1 |
Pitch | 3.68mm |
Gender | Female |
Mounting Type | Cable Mount |
Series | STANDARD .062" |
For Use With | 1778 Male PC Tail Terminals, 1779 Female PC Tail Terminals, Female Crimp Terminals 1561, Female Crimp Terminals 1787, Female Crimp Terminals 1855, Female Crimp Terminals 2189, Female Crimp Terminals 2190, Female Crimp Terminals 4529, Female Crimp Terminals 4559, Male Crimp Terminals 1560, Male Crimp Terminals 1786, Male Crimp Terminals 1854 |
Body Orientation | Straight |
Length | 8.64mm |
Width | 5.92mm |
Housing Material | Nylon |
- RS-stocknr.:
- 679-4805
- Fabrikantnummer:
- 03-06-1023
- Fabrikant:
- Molex