onsemi MC74VHCT245ADTG, Voltage Level Shifter Bus Transceiver 1, 24-Pin TSSOP
- RS-stocknr.:
- 186-8350
- Fabrikantnummer:
- MC74VHCT245ADTG
- Fabrikant:
- onsemi
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10/06/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk (in een verpakking 25)
€ 0,572
(excl. BTW)
€ 0,692
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 25 - 75 | € 0,572 | € 14,30 |
| 100 - 475 | € 0,426 | € 10,65 |
| 500 - 975 | € 0,36 | € 9,00 |
| 1000 - 2475 | € 0,33 | € 8,25 |
| 2500 + | € 0,322 | € 8,05 |
| *prijsindicatie | ||
- RS-stocknr.:
- 186-8350
- Fabrikantnummer:
- MC74VHCT245ADTG
- Fabrikant:
- onsemi
Datasheets
Wetgeving en conformiteit
Productomschrijving
High Speed: tPD = 4.9ns (Typ) at VCC = 5V
Low Power Dissipation: ICC = 4μA (Max) at TA = 25 C
High Noise Immunity: VNIH = VNIL = 28% VCCPower Down Protection Provided on Inputs and Outputs
Balanced Propagation Delays
Designed for 2V to 5.5V Operating Range
Low Noise: VOLP = 1.2V (Max)
Pin and Function Compatible with Other Standard Logic Families
Latchup Performance Exceeds 300mA
ESD Performance: HBM > 2000V, Machine Model > 200V
Chip Complexity: 304 FETs or 76 Equivalent Gates
Application Notes
Do not force a signal on an I/O pin when it is an active output, damage may occur.
All floating (high impedance) input or I/O pins must be fixed by means of pull up or pull down resistors or bus terminator ICs.
A parasitic diode is formed between the bus and VCC terminals. Therefore, the VHC245 cannot be used to interface 5V to 3V systems directly.
Low Power Dissipation: ICC = 4μA (Max) at TA = 25 C
High Noise Immunity: VNIH = VNIL = 28% VCCPower Down Protection Provided on Inputs and Outputs
Balanced Propagation Delays
Designed for 2V to 5.5V Operating Range
Low Noise: VOLP = 1.2V (Max)
Pin and Function Compatible with Other Standard Logic Families
Latchup Performance Exceeds 300mA
ESD Performance: HBM > 2000V, Machine Model > 200V
Chip Complexity: 304 FETs or 76 Equivalent Gates
Application Notes
Do not force a signal on an I/O pin when it is an active output, damage may occur.
All floating (high impedance) input or I/O pins must be fixed by means of pull up or pull down resistors or bus terminator ICs.
A parasitic diode is formed between the bus and VCC terminals. Therefore, the VHC245 cannot be used to interface 5V to 3V systems directly.
Specificaties
Kenmerk | Waarde |
|---|---|
| Logic Family | VHCT |
| Mounting Type | Surface Mount |
| Number of Elements per Chip | 1 |
| Package Type | TSSOP |
| Pin Count | 24 |
| Output Type | TTL |
| Dimensions | 7.9 x 4.5 x 1.05mm |
| Logic Function | Bus Transceiver |
| Maximum Low Level Output Current | 8mA |
| Maximum High Level Output Current | -8mA |
| Propagation Delay Test Condition | 50pF |
| Maximum Operating Supply Voltage | 4.5 to 5.5 V |
| Maximum Propagation Delay Time @ Maximum CL | 9.5 ns @ 50 pF |
| Maximum Operating Temperature | +85 °C |
| Minimum Operating Supply Voltage | 4.5 V |
| Minimum Operating Temperature | -40 °C |