Chauvin Arnoux CA762 IP2X Voltage Indicator Continuity Check CAT IV 600 V

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762

Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Full integrated autotest
Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC
Single-pole phase test
Phase sequence testing up to 400 Hz
Input impedance >400 kΩ
Continuity testing
Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ
Phase rotation, 2-wire method
Removable test probe and cable
Dimensions 163 x 64 x 40 mm
IP65 protection rating
Weight 210 g

Note

The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages.

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specificaties
Kenmerk Waarde
Maximum Voltage 690 V ac, 750V dc
Continuity Check Yes
Safety Category CAT IV 600V
Display Type LED
IP Rating IP65
Battery Type AAA Battery, LR3 Battery
Power Source Battery
Dimensions 163 x 64 x 40mm
Weight 210g
Height 40mm
Length 163mm
Maximum Operating Temperature +45°C
Minimum Operating Temperature -15°C
Safety Category Level CAT IV
Width 64mm
Model Number p CA762 IP2X
Safety Category Voltage 600V
14 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
82,00
(excl. BTW)
99,22
(incl. BTW)
Aantal stuks
Per stuk
1 +
82,00 €
Kalibratie-opties
Related Products
RS PRO IVT-20 two-pole voltage indicator and continuity ...
Description:
RS PRO IVT-20 two-pole voltage indicator and continuity testers are rugged and easy to use. The IVT20 voltage tester has a number of features such as auto sensing of ACV, DCV, Ω, Continuity and Diode. Voltage indicators are essential test ...
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow ...
Description:
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audible and visual warning of the voltmeter makes your work more efficient and convenient. The self-test function checks the status ...
Using FieldSense Technology the T6-1000 measures voltage up ...
Description:
Using FieldSense Technology the T6-1000 measures voltage up to 1000 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as ...
Tester for automobile electric and electronic circuits. Its ...
Description:
Tester for automobile electric and electronic circuits. Its low power consumption of 1.5mA is suitable for locating faults in electronic components where conventional lamp testers may cause damage. It has a crocodile clip on one end, and a tester with ...