T110 Voltage Indicator with RCD Trip Test Continuity Check CAT III 690 V, CAT IV 600 V With RS Calibration

  • RS-stocknr. 749-2819
  • Fabrikantnummer FLUKE T110
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: RO
Productomschrijving

Fluke Voltage and Continuity Tester

The Fluke 2-pole voltage and continuity tester measure voltage ranging between 12V and 690VAC/DC. This tester offers the best combination of safety, ease of use and fast answers available anywhere. It comes with probe storage accessory, push-on probe tips, batteries and instruction manual.

Features and Benefits

400kohm continuity test-audible results with ON/OFF
GS38 compliant tip caps
LED indicators
Detects voltage even when the batteries are discharged
Vibratory indicator under load
Switchable load
Built-in electric torch for use in dark areas
Phase rotation indicator for 3-phase systems
Probe protector
Thick test leads with wear indicators
Operates on 2xAAA batteries
Improved probe docking system ensures that probes are protected when stored
Push on probe tips reduce metal exposure between 19mm to 4mm
WearGuard indicator shows damage to test leads
CAT IV 600 V, CAT III 690 V safety ratings
Low battery indicator
Rugged and easy-to-operate
Handheld and lightweight
Ergonomic design
Weight is 180g
Operating temperature ranges between -15°C and 45°C

Applications

Electrical systems
Industrial sites
Commercial sites

Certifications

IP64 rated
IEC EN 61243-3: 2010

Specificaties
Kenmerk Waarde
Maximum Voltage 690V
Continuity Check Yes
Safety Category CAT III 690 V, CAT IV 600 V
Display Type Digital
RCD Trip Test Yes
IP Rating IP64
Calibrated RSCAL
Battery Type AAA
Power Source Battery
Dimensions 260 x 70 x 38mm
Weight 280g
Height 38mm
Length 260mm
Width 70mm
Model Number p T110
74 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
135,00
(excl. BTW)
163,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
135,00 €
Related Products
VoltALERT non-contact voltage tester is the next generation ...
Description:
VoltALERT non-contact voltage tester is the next generation from Fluke, designed for ease of use. Simply touch the tip of the device to a terminal strip, supply wire or outlet and the whole nib glows red with a beeping noise ...
LED flashlight and non-contact voltage detector combined, Fluke ...
Description:
LED flashlight and non-contact voltage detector combined, Fluke presents the neat and compact Volt Light. When AC voltage has been detected the tester will glow blue, when the source has been detected the tester will glow red. Detected voltage and ...
The Fluke volt light is a non-contact AC ...
Description:
The Fluke volt light is a non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. This includes dual sensitivity turning blue 2.54cm to 12.7cm from the source and red when at the source. It ...
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow ...
Description:
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audible and visual warning of the voltmeter makes your work more efficient and convenient. The self-test function checks the status ...