John Drummond DRUMTL20 Voltage Indicator CAT III 1000 V, CAT IV 600 V With RS Calibration

Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: PH
Productomschrijving

Drummond Test Lamp MTL20

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Right angled probe tip, two straight tips and instructions

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Mains Voltage Indicators - Contact

Specificaties
Kenmerk Waarde
Maximum Voltage 500V ac/dc
Safety Category CAT III 1000 V, CAT IV 600 V
Display Type LED
IP Rating IP67
Calibrated RSCAL
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 350g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Width 112mm
Safety Category Level CAT III, CAT IV
Model Number p DRUMTL20
Minimum Operating Temperature -10°C
Safety Category Voltage 600 V, 1000 V
12 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
143,00
(excl. BTW)
173,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
143,00 €
Related Products
The multi-purpose version of the popular FD550. Supplied ...
Description:
The multi-purpose version of the popular FD550. Supplied in a robust case complete with transmitter and receiver, additional features include a 13A plug top lead for sockets and fused test lead set with crocodile clips for junction boxes, terminals and ...
Safely detect the presence of AC voltage in ...
Description:
Safely detect the presence of AC voltage in cables, wires, wall sockets fuses and junction boxes with the RS PRO VP-4. Ergonomically designed for comfort, it features a built in torch for confined spaces, a clip for pockets or tool ...
The Non-Contact VoltStick® is a tester for safely ...
Description:
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic ...
Indication of the three phases via LCDIndication of ...
Description:
Indication of the three phases via LCDIndication of the phase rotation direction via LCDSwift determination of the phase sequence in three-phase networksVoltage and frequency range suitable for industrial systemsLC-display with good visibility in bright areas (i.e. outdoor)Non-Fused test probes (500mA ...