RS PRO IVT-10 Voltage Indicator with RCD Trip Test Continuity Check CAT III 750 V, CAT IV 600 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IVT-10 LED Voltage Indicator

RS PRO IVT-10 two-pole voltage indicator and continuity tester is rugged and easy to use. Voltage indicators are essential test and measurement equipment for electricians and are used to make sure there is no risk of electrocution when working with live circuits. The RS PRO IVT-10 is a great device and can be used for many applications to give a clear indication if a circuit is live or not therefore ensuring your safety.

Features and Benefits

  • 2 pole test with LED display indicators
  • 12 V to 750 V ac/dc Voltage indication range
  • Integrated single pole test for phase detection
  • Rotary field indication
  • Continuity Beeper
  • Ultra bright white LED torch
  • Screw on tip adapters to select 2 mm or 4 mm diameter probe tips
  • Self-test
  • IP65-water-jet and dust tight protection for outdoor use
  • Compact design with convenient battery door
  • Battery life: 200 hours
  • Drop proof – up to 1m
  • Auto power on/off
  • Power requirement: 2 x 1.5 V IEC LR03 or AAA size
  • Dimensions: 68 mm x 239 mm x 29 mm
  • Weight: 230g (including batteries)
  • IP2X test probes (retractable probe tip shroud)
Specifications:
  • Voltage Test - Range 12V-750 V ac/dc
  • Continuity Test - Threshold - <200KΩ

Typical Applications:

Voltage indicators are hand-held proving devices that are used to test if a circuit is live or not. This is essential for carrying out electrical work at home or on the job to ensure there is no risk of electrocution when working with live circuits. Voltage indicators can include features such as an LED light or audible beep to identify the user of a live electrical presence. Proving units like these are commonly used by:

  • Electricians
  • DIY enthusiasts

Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO seal of approval if were confident of their exceptional quality, which means you can be confident too.

Standards

CAT IV 600 V/CAT III 750 V

Supplied with

Batteries and manual

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specificaties
Kenmerk Waarde
Maximum Voltage 750V ac/dc
Continuity Check Yes
Safety Category CAT III 750 V, CAT IV 600 V
RCD Trip Test Yes
IP Rating IP65
Battery Type 1.5 V AAA, 1.5 V IEC LR03
Power Source Battery
Dimensions 68 x 29 x 239mm
Weight 230g
Height 239mm
Length 68mm
Maximum Operating Temperature +50°C
Model Number p IVT-10
Minimum Operating Temperature 0°C
Width 29mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02/06/2020, met een levertijd van 1 werkdag.
Prijs Each
52,00
(excl. BTW)
62,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
52,00 €
Kalibratie-opties
Related Products
Built for detecting voltage quality or disturbance problems, ...
Description:
Built for detecting voltage quality or disturbance problems, the Fluke VR1710 is a single-phase, plug-in, fast and easy to use recorder ensuring users pin point root causes.Featuring easy recording of voltage trends, harmonics up to the 32nd, transients, flicker, dropouts ...
RS Pro VP-3 Volt Stick is a pen ...
Description:
RS Pro VP-3 Volt Stick is a pen style non-contact AC voltage indicator. Safely checks the presence of an AC voltage in cables, wall sockets, fuses and junction boxes. No current flow is needed for correct operation. An essential tool ...
Safely detect the presence of AC voltage in ...
Description:
Safely detect the presence of AC voltage in cables, wires, wall sockets fuses and junction boxes with the RS PRO VP-4. Ergonomically designed for comfort, it features a built in torch for confined spaces, a clip for pockets or tool ...
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow ...
Description:
Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audible and visual warning of the voltmeter makes your work more efficient and convenient. The self-test function checks the status ...