Fluke PRV240FS Voltage Indicator Proving Unit LED RS Calibration

  • RS-stocknr. 146-2609
  • Fabrikantnummer PRV240FS
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

Fluke PRV240FS Proving Unit for T6 Testers

The Fluke PRV240FS Proving Unit is a portable, pocket-sized, battery-powered voltage source. It is built to prove the functionality of the FieldSense measurement on the T6 test equipment. It also provides ac and dc voltages for other HiZ instruments in your tool box. The Fluke PRV240FS provides a safe method to verify that your T6 test equipment is operating properly before you conduct any live tests. The concept of “Test Before Touch” (TBT) involves testing your T6 against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement. Verify your test tool without unnecessary exposure to shock and arc flash. The PRV240FS reduces the need for personal protective equipment (PPE) when a known voltage source is not available. PPE is still needed for absence of voltage testing when appropriate. This unit is a simple-to-use solution for complying with TBT verification of your test tools.

Features and Benefits

• Unique • Compact
• Designed for safety and compliance
• PRV240FS reduces the risk of shock and arc flash
• Can prove functionality of the FieldSense measurement on the T6 test equipment
• Sources both ac and dc steady-state voltage supplies 240 V dc/ac
• A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability, plus standard ac and dc measurements with test leads
• Compatible with high impedance multimeters or clamp meters
• Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, and through recessed contacts that are activated when test probes are inserted to avoid accidental contact
• Long battery life, 2000 tests per set of four AA batteries (10 second test average)

Supplied with

TPAK hanging strap, four AA batteries and instruction sheet

Mains Voltage Indicators - Contact

Specificaties
Kenmerk Waarde
Display Type LED
Calibrated RSCAL
Battery Type AA
Power Source Battery
Dimensions 7.4 x 2.8 x 11.7mm
Weight 230g
Height 11.7mm
Length 7.4mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Model Number p PRV240FS
Width 2.8mm
15 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
210,00
(excl. BTW)
254,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
210,00 €
Related Products
Positive fuses/circuit breaker location even under noisy circuit ...
Description:
Positive fuses/circuit breaker location even under noisy circuit conditionsAutomatic scanning technologyAudible and LED bargraph indication of correct fuse foundAuto power off for extended battery lifeMains powered transmitter: dual voltage operation 100 to 250Vac (50-60Hz)Plug in BS1363 IEC UK mains lead ...
The FLIR VP50 is a tough Non-Contact Voltage ...
Description:
The FLIR VP50 is a tough Non-Contact Voltage Detector featuring a combination of alerts – including tactile vibration, red LED alarms, and a powerful LED worklight— so you’ll never miss the presence of voltage even in dark or noisy areas. ...
The Megger VF3 voltage detector resembles a small ...
Description:
The Megger VF3 voltage detector resembles a small pen like instrument. It is used to identify the presence of live AC voltages of socket outlets, switches, circuit breakers, fuses, luminaries, wires and cables ranging from 60V to 90V at 50Hz ...
Phase sequence indicator with electronic rotary disk, frequency ...
Description:
Phase sequence indicator with electronic rotary disk, frequency display and nominal voltage displayRotary field direction display by 6 optically rotating LEDs with colour switchingNominal supply voltage displayed by 3 LEDsNominal supply frequency displayed by 6 LEDsError indication: imbalance and missing ...