BEHA-Amprobe SC-7000 Signal Clamp for AT-7000 Advanced Wire Tracer

  • RS-stocknr. 909-4124
  • Fabrikantnummer SC-7000-EUR
  • Fabrikant Beha-Amprobe
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Beha-Amprobe SC-7000-EUR Signal Clamp

Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe AT-7000 advanced wire tracers when there is no access to bare conductors. The clamp induces a signal into either energised or de-energised circuits for wire tracing and load locating. The AT-7000-TE transmitter 'clamp' mode provides a boosted 6 kHz signal through the clamp to further improve accuracy and performance.

For inducing signal into wires without access to bare conductors
Jaw opening 5.08 cm (2 in)
Operating temperature range -17.77 °C to +49 °C (0 to 120 °F)
Operating humidity 95% RH max
Measurement Category CAT IV 600 V
Drop test 1 m (3.28 ft)
Protection rating IP52
Dimensions 20.83 x 8.13 x 4.27 cm (8.2 x 3.2 x 1.68 in)
Weight 0.294 kg (0.648 lb)

Note

SC-7000-EUR signal clamp is included in Beha-Amprobe Advanced Wire Tracer Kit AT-7030-EUR ( 909-4127 ). The signal clamp is not included in Beha-Amprobe Advanced Wire Tracer Kit AT-7020-EUR ( 909-4120 ).

Specificaties
Kenmerk Waarde
Accessory Type Signal Clamp
For Use With AT-7000 Advanced Wire Tracer
Model Number p SC-7000
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07/07/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
342,00
(excl. BTW)
413,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
342,00 €
Related Products
The strong CS4550 clamp with its special soft ...
Description:
The strong CS4550 clamp with its special soft grip expands onto round and flat surfaces up to 45 mm. expands onto round and flat surfaces up to 45mm.Features Internal threads: 2 x 1/4",2 x 3/8",1 x 6mm,1 x 8mmSafety pin ...
Toggling between modes has now been eliminated, speeding ...
Description:
Toggling between modes has now been eliminated, speeding up the testing process and reducing error. Fluke Networks cable verifier has the ability to display key results, pair lengths, distance to fault, cable ID, far-end devices and wiremap all on just ...
Toggling between modes has now been eliminated, speeding ...
Description:
Toggling between modes has now been eliminated, speeding up the testing process and reducing error. Fluke Networks cable verifier has the ability to display key results, pair lengths, distance to fault, cable ID, far-end devices and wiremap all on just ...
1 x replacement cable tracer/remote for SecuriTEST IP. ...
Description:
1 x replacement cable tracer/remote for SecuriTEST IP.