Monitran Vibration Sensor 8 mA -25°C → +120°C, Dimensions 22 x 48 mm

  • RS-stocknr. 533-2346
  • Fabrikantnummer MTN/1020
  • Fabrikant Monitran
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

MTN/1020 Mini Accelerometer with TNC Connector and A/C Output

Used for general industry, pumps, fans, air handling units, machine tools
100 mV/g ±10% Nominal at 80 Hz
Frequency from 2 Hz to 13 kHz
+/-80G Dynamic acceleration range
Bias voltage nominal 12Vdc
Electrical noise 0.1 mg max
TNC Connection
IP 65 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 19x40mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specificaties
Kenmerk Waarde
Maximum Current 8 mA
Minimum Operating Temperature -25°C
Maximum Operating Temperature +120°C
Dimensions 22 x 48 mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
227,16
(excl. BTW)
274,86
(incl. BTW)
Aantal stuks
Per stuk
1 +
227,16 €
Related Products
Balluff Micropulse magnetostrictive linear position transducers deliver highly ...
Description:
Balluff Micropulse magnetostrictive linear position transducers deliver highly accurate and reliable position control signals. Balluff’s non-contact magnetostrictive technology means performance does not reduce over time and have proven reliable in demanding industrial position monitoring and measurement ...
Introducing the RS PRO DPI series Differential Pressure ...
Description:
Introducing the RS PRO DPI series Differential Pressure Manometer. This high-quality device from RS PRO measures differential pressure with high accuracy of up to 350 mbar or 5 psi. This compact and rugged manometer has a wide variety of measurement ...
SICK W12-3 photoelectric sensors are enclosed in a ...
Description:
SICK W12-3 photoelectric sensors are enclosed in a rugged metal housing for demanding applications. Distinguished by the ability to offer reliable detection over long sensing distances. The sensors are compatible for various operations, with the in-built SICK ASIC technology. The ...
The highly versatile AMM20B Series non-contacting multi-turn rotary ...
Description:
The highly versatile AMM20B Series non-contacting multi-turn rotary position sensor has a 12-bit resolution, a rotational life of up to 50 million cycles and a factory programmable electrical angle from 1080 to 3600 degrees. Designed to meet the specifications of ...