TE Connectivity Vibration Sensor → +85°C, Dimensions 25 (mm) x 13 (mm) x 205 (μm)

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

TE Connectivity LDT Series Piezo Vibration Sensors

TE Connectivity’s MEAS LDT series of piezo vibration sensors are constructed with a piezo film element laminated to a polyester layer. A wide range of lead attachments are available. Some of this series are supplied with solder tabs for direct application with PCBs whilst others are completed with a twisted pair wire. The capacitance is proportional to the area and inversely proportional to the thickness of the element.

Suitable applications for LDT0/M vibration sensors include low power wakeup switch, low cost vibration sensing, car alarms, security systems, washing machine vibration sensing and body movement. The LDT1 range can be used for measuring impact related events, counting the number of impact related events, recording the time of an event, sensing direct contact force, sensing vibration using a cantilevered switch, wakeup switches and motion detection are all suitable applications. LDT2/4 piezo sensors are suitable for solid state switches for counters, momentary close type switches and beam-type vibration sensors.

Multi-purpose
Robust
Laminated
Impact sensing
Multi-purpose

Specificaties
Kenmerk Waarde
Length 25mm
Width 13mm
Depth 0.205mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +85°C
Dimensions 25 (mm) x 13 (mm) x 205 (μm)
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 1000)
1,807
(excl. BTW)
2,186
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
1000 - 1000
1,807 €
1.807,00 €
2000 +
1,671 €
1.671,00 €
*prijsindicatie