Huco Universal Joint 105.32.4848, Single, Plain, Bore 20 x 20mm, 86mm Length

  • RS-stocknr. 511-3820
  • Fabrikantnummer 105.32.4848
  • Fabrikant Huco
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Miniature Acetal Fork Universal Joint

A comprehensive range of light duty universal joints manufactured in non-ferrous metals and Acetal, with a -40 to 85°C operating range.

Corrosion resistant construction
Freedom from backlash
No lubrication required
Electrical isolation between shafts
Available with metric or imperial bore sizes at both ends, or as combination metric/imperial types

Additional bore combinations can be created using suitable reducing bushes, see Bushes, Clamps & Collars - Bore Reducing Bushes.

//media.rs-online.com/t_line/L688947-01.gif
Specificaties
Kenmerk Waarde
Number of Joints Single
Joint Type Plain
Hub Type Bored Hub
Bore 20 x 20mm
Hub Outer Diameter 36.5mm
Overall Length 86mm
Maximum Working Angle 40°
Peak Torque 10.7Nm
Material Brass
Maximum Speed 1000rpm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
20,20
(excl. BTW)
24,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
20,20 €
5 - 9
19,59 €
10 +
18,95 €
Related Products
Extremely versatile couplings specified in industries as diverse ...
Description:
Extremely versatile couplings specified in industries as diverse as robotics and aerospaceMaximum speed 500rpm.
Universal joints for connecting a wide range of ...
Description:
Universal joints for connecting a wide range of equipment where there is a misalignment greater than 5°. Suitable for connecting line shafts, drive shafts, conveyors and most types of rotating machinery to a prime mover. Plain bearing universal couplings are ...
Carbon steel universal joints for connecting equipment where ...
Description:
Carbon steel universal joints for connecting equipment where there is a misalignment greater than 5 degrees up to an angle of 90 degrees. These universal joints are constructed using wear resistant sliding bushes, suitable for applications with speeds of up ...