Pull Action Tubular Solenoid, 13.5 V dc, 8W

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Johnson Electric Pull Action Tubular Solenoid

The Johnson Electric pull action tubular solenoid works on 13.5VDC supply voltage. It provides high force for short stroke applications and is ideal for applications that require long life and high reliability. The STA technology is constructed with a low friction system bobbin, which ensures a life of 25 million actuations. The STA-Series provides high resistance to shock and vibration to withstand extreme ambient conditions and is also available in magnetic latching versions.

Features and Benefits

100% duty cycle Coil resistance of 22.78ohm Dielectric strength is 1000VRMS Strokes up to 2-1/2in Wire size is 30AWG

Applications

Card readers Drum friction brakes Pen plotters Pumps

Specificaties
Kenmerk Waarde
Maximum Stroke 10mm
Action Pull
Duty Cycle 100%
Closed Power Continuous 8W
Supply Voltage 13.5 V dc
Diameter 25.9 mm
Length 29.85mm
Weight 110g
Wire Size 30AWG
Coil Resistance 22.78Ω
32 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
60,65
(excl. BTW)
73,39
(incl. BTW)
Aantal stuks
Per stuk
1 +
60,65 €
Related Products
Johnson Electric’s linear open frame solenoid technology consists ...
Description:
Johnson Electric’s linear open frame solenoid technology consists of an open iron frame, an overmolded or taped coil, and a movable plunger in the center of the coil. This platform is available in AC and DC versions and in two ...
Johnson Electric’s linear open frame solenoid technology consists ...
Description:
Johnson Electric’s linear open frame solenoid technology consists of an open iron frame, an overmolded or taped coil, and a movable plunger in the center of the coil. This platform is available in AC and DC versions and in two ...
The RS PRO push action 24VDC D-frame solenoid ...
Description:
The RS PRO push action 24VDC D-frame solenoid has a total weight of 42g. The solenoid has a length of 29.35mm, a depth of 19.1mm and width of 15.9mm. • Corrosion resistant plated parts• Flying leads• Pull type.
Single-acting linear electromagnets for automated systems.Push or pull ...
Description:
Single-acting linear electromagnets for automated systems.Push or pull models available.Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50 ...