RS PRO Trace Heating Termination Kit, Maximum of +65 °C

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Frost Protection Heating Tape

For frost protection of water and low temperature product lines. A parallel resistance, cut to length on site, self-regulating heating cable designed for frost protection, process pipework maintaining and hot water temperature maintaining. Adjusts heat output to equal the heat loss from the pipe work. As pipe temperature falls under no-flow conditions or due to decrease in external or internal temperature, ESR- increases output. As the pipe temperature increases under flow conditions or as a result of increasing external or internal temperature so output from ESR-S decreases. Adhesive lined heatshrink termination kit also available.

Specificaties
Kenmerk Waarde
Type Termination Kit
Dimensions 130 x 75 x 130mm
Minimum Operating Temperature -35°C
Maximum Operating Temperature +65°C
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Kit
43,37
(excl. BTW)
52,48
(incl. BTW)
Kit(s)
1 +
43,37 €
Related Products
Low profile cord designed to eliminate space interference ...
Description:
Low profile cord designed to eliminate space interference when accessing removable hot swap blade modules. Output Connections (1) IEC 320 C19Input Connections IEC-320 C20Maximum Input Current per phase 16A.
Suitable for termination of FroStop® and WinterGard® cablesTemperature ...
Description:
Suitable for termination of FroStop® and WinterGard® cablesTemperature resistant junction boxFor power connection of T connectionUse with CE20-01 connection and end seal kitKit contains: JB 16-02 junction box and JB-SB-08 support bracket.
Suitable for BTV/XTV heating cables in hazardous/non-hazardous areasThe ...
Description:
Suitable for BTV/XTV heating cables in hazardous/non-hazardous areasThe kit integrates the functions of connection kit, insulation entry kit and support bracketHeating cable is fully protected Fast and easy to install Cold applied, no need for heat gunsCage clamp terminal for ...
Connection kit for BTV/XTV self regulating heating cables ...
Description:
Connection kit for BTV/XTV self regulating heating cables to a junction boxApproval for use in zone 1 and zone 2 hazardous areasSimple and fast installation Cold applied sealing bootNo special tools required M25 gland.