MTCH108-I/SS, Capacitive Touch Screen Controller Simple I/O, 20-Pin SSOP

  • RS-stocknr. 905-3176
  • Fabrikantnummer MTCH108-I/SS
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

MTCH102/105/108 Capacitive Proximity Touch Controllers

The MTCH102, MTCH105 and MTCH108 devices from Microchip are Capacitive Touch/Proximity Controller ICs that convert touch or proximity detection into a simple digital output. The sensitivity level of the controller is configurable and a low-power mode included, allowing for easy optimisation.

Features

High Signal to Noise Ratio (SNR)
Adjustable Sensitivity with Compensation for Different Sensor Sizes
Multi-Stage Active Noise Suppression Filters
Automatic Environmental Compensation
Supports a Wide Range of Sensor Shapes and Sizes
Simple I/O Interface
Smart Scan Scheduling
Threshold Hysteresis
Flexible Low-Power Mode
Brown-Out Protection
Operating Voltage Range: 2.05V to 3.6V
Operating Temperature: -40°C to +85°C

Human Machine Interface (HMI), Microchip

Specificaties
Kenmerk Waarde
Interface Type Simple I/O
Sensing Technology Capacitive
Mounting Type Surface Mount
Package Type SSOP
Pin Count 20
Typical Operating Supply Voltage 2.05 → 3.6 V
Dimensions 7.5 x 5.6 x 1.85mm
Length 7.5mm
Width 5.6mm
Height 1.85mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
220 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,855
(excl. BTW)
1,035
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
0,855 €
8,55 €
30 +
0,832 €
8,32 €
*prijsindicatie
Related Products
A range of Programmable System-on-chip (PSoC®) products from ...
Description:
A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.
The Microchip mTouch™ AR1000 Series Resistive Touch Screen ...
Description:
The Microchip mTouch™ AR1000 Series Resistive Touch Screen Controller is a complete, easy to integrate, cost-effective and universal touch screen controller chip solution. Additional Features: Supports any manufacturer's 4-, 5-, or 8-wire analog resistive touch screen I2C or SPI communication1024x1024 ...
The AT42QT101x Single Key capacitive touch controller family ...
Description:
The AT42QT101x Single Key capacitive touch controller family provides an easy way to add a touch key to any application. It implements advanced filtering algorithm to offer robust operation in noisy environment. Sensitivity and low power modes can be configured ...
The BU21024FV-M is 4-wire resistive touch screen controller ...
Description:
The BU21024FV-M is 4-wire resistive touch screen controller IC. 4-wire resistive touch screen interface3.0V single power supply4-wire SPI interface / 2-wire serial interfaceSelectable download way of CPU firmware (Host or EEPROM)Two points and gesture detection.