BU21029GUL-E2, Resistive Touch Screen Controller, 12 bit 2-Wire, 50-Pin VCSP50L2

  • RS-stocknr. 185-1351
  • Fabrikantnummer BU21029GUL-E2
  • Fabrikant ROHM
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Unlike most resistive touch screen controllers, the BU21029GUL 4-wire resistive touch-screen controller can generate data that enables dual touch detection. The Host processor can use this data to detect single and dual point coordinates.

Single and dual touch detection for standard 4-wire resistive touch screens
I²C-like interface for interfacing with the host processor
12-bit resolution
Single 1.65V to 3.60V supply
Power on reset
Auto power down control
Built-in clock oscillator circuit

Specificaties
Kenmerk Waarde
Resolution 12 bit
Sensing Technology Resistive
Sensing Wire Type 2-Wire
Mounting Type Surface Mount
Package Type VCSP50L2
Pin Count 50
Typical Operating Supply Voltage 3 V
Dimensions 2 x 2 x 0.55mm
Length 2mm
Width 2mm
Height 0.55mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -20 °C
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (In a Pack of 5)
1,758
(excl. BTW)
2,127
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,758 €
8,79 €
25 - 95
1,614 €
8,07 €
100 - 245
1,54 €
7,70 €
250 +
1,44 €
7,20 €
*prijsindicatie
Related Products
A range of Programmable System-on-chip (PSoC®) products from ...
Description:
A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.
The MTCH102, MTCH105 and MTCH108 devices from Microchip ...
Description:
The MTCH102, MTCH105 and MTCH108 devices from Microchip are Capacitive Touch/Proximity Controller ICs that convert touch or proximity detection into a simple digital output. The sensitivity level of the controller is configurable and a low-power mode included, allowing for easy ...
The MTCH105 is a 5 channels Proximity/Touch controller ...
Description:
The MTCH105 is a 5 channels Proximity/Touch controller with 5 simple digital outputs. The sensitivity and power mode can be configured. The MTCH105 device uses an advanced optimization algorithm to actively suppress noise from the signal to achieve reliable proximity/touch ...
The AT42QT101x Single Key capacitive touch controller family ...
Description:
The AT42QT101x Single Key capacitive touch controller family provides an easy way to add a touch key to any application. It implements advanced filtering algorithm to offer robust operation in noisy environment. Sensitivity and low power modes can be configured ...