CY8C20110-LDX2I, Capacitive Touch Screen Controller Serial-I2C 2-Wire, 16-Pin QFN

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CapSense® Touch Controllers, Cypress Semiconductor

A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.

Touch Screen Controllers

Specificaties
Kenmerk Waarde
Interface Type Serial-I2C
Sensing Technology Capacitive
Sensing Wire Type 2-Wire
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Typical Operating Supply Voltage 2.4 → 5.25 V
Dimensions 3 x 3 x 0.55mm
Length 3mm
Width 3mm
Height 0.55mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
490 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,48
(excl. BTW)
3,00
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
2,48 €
12,40 €
25 - 45
2,332 €
11,66 €
50 - 95
2,132 €
10,66 €
100 - 245
1,984 €
9,92 €
250 +
1,86 €
9,30 €
*prijsindicatie
Verpakkingsopties
Related Products
The BU21023MUV is 4-wire resistive touch screen controller ...
Description:
The BU21023MUV is 4-wire resistive touch screen controller IC. 4-wire resistive touch screen interface3.0V single power supply4-wire SPI interface / 2-wire serial interfaceSelectable download way of CPU firmware (Host or EEPROM)Two points and gesture detectionApplications:Coin Processing MachinesBarcode ...
BU21025GUL is a low power 4-wire resistive touchscreen ...
Description:
BU21025GUL is a low power 4-wire resistive touchscreen controller. BU21025GUL measures coordinates and touch pressures with a 12bit A/D converter.BU21025GUL has a digital filter for noise reduction. 4-wire resistive touch screen controllerSingle 1.65V to 3.60V supply.Low standby current ( 0.8uA ...
BU21027MUV supports 2points coordinate at the 4-wire resistive ...
Description:
BU21027MUV supports 2points coordinate at the 4-wire resistive touch screen. Introduction of 2points touch detection becomes easy by automatic adjustment function. Support 4-wire resistive touch screen.Support 2 points touch detection.Automatic adjustment of parameters for 2 points touch detection.2-wire serial ...
The MTCH105 is a 5 channels Proximity/Touch controller ...
Description:
The MTCH105 is a 5 channels Proximity/Touch controller with 5 simple digital outputs. The sensitivity and power mode can be configured. The MTCH105 device uses an advanced optimization algorithm to actively suppress noise from the signal to achieve reliable proximity/touch ...