NKK Switches Single Pole Single Throw (SPST) Toggle Switch, Latching, IP60, IP67, Panel Mount

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

NKK Switches - WT Series Environmentally Sealed Toggle Switches

The NKK WT Series of environmentally sealed toggle switches have distinctive characteristics making them an ideal choice. The switches have an epoxy sealed base covered by an outer case which doubles the protection from dust and water. The switches are not operable under water or oil. Made with interlocked movable contact mechanisms they provide highly reliable switching by minimising contact bounce over centre contact. The heat resistant resin used for the housing meets UL94V-0 flammability standard and provides high arc and tracking resistance.

Features and Benefits

• Specially designed contact mechanism
• Single unit construction of bushing and case
• Heat resistant resin for outer housing
• Meets UL94V-0 flammability standard
• Brass with with chrome plating

Specificaties
Kenmerk Waarde
Contact Configuration SPST
Switch Operation Latching
Contact Current Rating 10 A
Mounting Type Panel Mount
Terminal Type Solder
IP Rating IP60, IP67
Panel Cut Out Diameter 12.5mm
Actuator Length 17.5mm
Actuator Material Chrome Plated Brass
Voltage Rating 30 V dc, 250 V ac
Contact Resistance 30mΩ
Minimum Operating Temperature -30°C
Maximum Operating Temperature +70°C
Contact Material Copper
Mechanical Life 50000Operations
Operating Temperature Range -30 +70°C
Panel Cut Out Size 12.5 (Dia.)mm
Standards Met CSA TEW 105 Certified, UL 94V-0, UL AWM 1015 Recognised
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each
20,80
(excl. BTW)
25,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
20,80 €
5 - 19
19,76 €
20 - 49
18,77 €
50 - 99
16,90 €
100 +
15,20 €
Related Products
Epoxy sealed terminals prevent contamination during solderingLocks into ...
Description:
Epoxy sealed terminals prevent contamination during solderingLocks into selected position by pulling actuator, prevents accidental switchingChrome Plated Brass actuatorDiallyl Phthalate (DAP) case (UL94V-0)Silver contacts.
Vertical and two types of right angle terminations ...
Description:
Vertical and two types of right angle terminations availableSuitable for low level switching applicationsTotally sealed, suitable for immersion cleaningWave solderable, will withstand 260°C for 5 secondsGold plated brass terminalsBrass actuator and PBT caseMinimum load current: 10mA at 50mV - 10μA ...
Panel mount switches with a large variety of ...
Description:
Panel mount switches with a large variety of contact configurationsSolder lug termination. Bush thread 1/4 - 40UNS (6.35 - 4UNS) Brass actuator and Diallyl Phthalate casePanel cut-out 6.35 mm.
Suitable for applications where space is at a ...
Description:
Suitable for applications where space is at a premiumEpoxy sealed terminals prevent flux ingressSilver plated brass contactsSolder lug terminalsBrass actuator and thermoplastic case.