Vishay RWM 6x22 Series Axial Wirewound Resistor 2.7kΩ ±5% 7W ±75ppm/°C

  • RS-stocknr. 485-3044
  • Fabrikantnummer RWM06222701JA15E1
  • Fabrikant Vishay
Wetgeving en conformiteit
Land van herkomst: CZ

RWM 6x22 Series 7W, Axial

Enamelled wirewound power resistors
Axial leads


CECC 40201-001//002, NFC 83210-001
CECC designation: RB57

A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic substrate and employs an all welded cap and lead method of construction giving considerable strength and resistance to damage. The vitreous enamel protective coating is resistant to all normal PCB cleaning solvents.Application note. Terminations should not be bent closer than 1.5mm from the body. Recommended minimum bend radius is 1mm. For full rated power dissipation terminations should not be soldered closer than 4mm from the body.When cold, vitreous enamel has excellent insulation resistance; however the specific resistance decreases with increasing temperature. Therefore if the resistor is operating at or near maximum temperature it cannot be classed as insulating and should not be in contact with any conducting materials.

Kenmerk Waarde
Resistance 2.7 kΩ
Power Rating 7W
Tolerance ±5%
Technology Wire Wound
Series RWM 6x22
440 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
1,302 €
6,51 €
125 - 245
0,836 €
4,18 €
250 - 495
0,794 €
3,97 €
500 - 1245
0,732 €
3,66 €
1250 +
0,61 €
3,05 €
Related Products
The ER74 Series are a range of high power dissipation Silicone coated resistors from TE Connectivity. Resistant to most solvents, the ER74 series has a tough silicone coating. The coating and marking are resistant to Trichloroethene VG, Genklene LV Hot ...
As there is a maximum temperature to which ...
As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the graph. Using the formula below ...
Flame-proof wirewound resistors with superior electrical and mechanical ...
Flame-proof wirewound resistors with superior electrical and mechanical characteristicsResistance wire wound on a fibreglass core and protected by a ceramic body Combines good thermal characteristics with high insulation resistance, and gives good physical protectionLead length allows vertical or horizontal ...
Vishay LVR series of precision power wirewound resistors ...
Vishay LVR series of precision power wirewound resistors offer a low temperature coefficient and low inductance. The LVR series is ideal for all types of current sensing applications including switching and linear power supplies, instruments and power amplifiers. Tinned copper ...