TE Connectivity ER58 Series Axial Wirewound Resistor 100Ω ±5% 7W 0 → +60ppm/°C

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IN
Productomschrijving

ER58 Series 6W, Axial

ER Series are high power dissipation Silicone coated resistors
Special pulse styles available
Resistant to most solvents

Silicone Coated Axial

Wire-wound power resistors manufactured to a very high standard and employing a ruggedised welded cap and lead method of construction giving considerable strength and resistance to damage. The element is wound onto a ceramic former and coated with a non-inflammable silicone cement.

Specificaties
Kenmerk Waarde
Resistance 100 Ω
Power Rating 7W
Tolerance ±5%
Technology Wire Wound
Series ER58
Minimum Operating Temperature -55°C
Maximum Operating Temperature +200°C
245 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
815 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,698
(excl. BTW)
0,845
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
0,698 €
3,49 €
125 - 245
0,59 €
2,95 €
250 - 495
0,546 €
2,73 €
500 - 1245
0,518 €
2,59 €
1250 +
0,492 €
2,46 €
*prijsindicatie
Verpakkingsopties
Related Products
RSSD medium and high power resistors are noted ...
Description:
RSSD medium and high power resistors are noted for their ability to withstand heavy transient and severe shock and vibrationconditions. They complement the ohmic range of Vishay styles RW, RWST and RA in the low value area, and can be ...
As there is a maximum temperature to which ...
Description:
As there is a maximum temperature to which the wire can rise during an overload, if the resistor is already dissipating heat, then the pulse energy applied should be less than that allowed by the graph. Using the formula below ...
A range of high power resistors in small ...
Description:
A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic ...
KOA original bulk ceramic resistorsCoated with flameproof materialExcellent ...
Description:
KOA original bulk ceramic resistorsCoated with flameproof materialExcellent in anti-pulse characteristicsNon-inductive resistorsProducts with lead-free terminations Higher reliability against disconnection compared to wirewound resistors and film resistors.