ATE Electronics 56kΩ Wire Wound Resistor 13W ±5% 10SR-56k-J
- RS-stocknr.:
- 124-1919
- Fabrikantnummer:
- 10SR-56k-J
- Fabrikant:
- ATE Electronics
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 124-1919
- Fabrikantnummer:
- 10SR-56k-J
- Fabrikant:
- ATE Electronics
Datasheets
Wetgeving en conformiteit
Productomschrijving
ATE Electronics SR Series Capacitor Balancing Resistors
The SR series of capacitor balancing resistors from ATE Electronics offers ±5% tolerance as standard. These resistors are available in E24 Series ohmic values. Featuring a dielectric strength of 1000 V ac, these balancing resistors can be used to minimise voltage imbalance from capacitors connected in a series. SR capacitor balancing resistors offer temperature coefficient values of ±100 to ±30 ppm from 10 Ω upwards. SR series resistors have been vibration tested to IEC 60571-1 standards. SR10 resistors have a 31.8mm centre and SR7 resistors have a 22.2mm centre. The fixing centre dimensions cover most of the screw terminal electrolytic capacitor offering.
Standards
IEC 60571-1
Capacitor Balancing Resistors
Specificaties
Kenmerk | Waarde |
|---|---|
| Resistance | 56kΩ |
| Power Rating | 13W |
| Tolerance | ±5% |
| Technology | Wire Wound |
| Series | 10SR |
| Maximum Operating Temperature | +350°C |
| Temperature Coefficient | ±30ppm/°C |
| Minimum Operating Temperature | -55°C |
- RS-stocknr.:
- 124-1919
- Fabrikantnummer:
- 10SR-56k-J
- Fabrikant:
- ATE Electronics