Böllhoff 230 piece M5 → M12 Thread Repair Kit

  • RS-stocknr. 470-945
  • Fabrikantnummer 41861000001
  • Fabrikant Böllhoff
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Thread repair kit - HELICOIL® plus M5 - M12

This kit is used to recover and repair damaged threads.
Kit contents: different lengths and dimensions of HELICOIL® plus threaded inserts, drill bits, HSS manual threads, manual pins, tang breakers.
Green colour to check the thread is present after fitting.

Thread Pitch No. of threaded inserts
M 5 x 5 0.8 20
M 5 x 7.5 0.8 20
M 5 x 10 0.8 20
M 6 x 6 1 20
M 6 x 9 1 20
M 6 x 12 1 20
M 8 x 8 1.25 10
M 8 x 12 1.25 10
M 8 x 16 1.25 10
M 10 x 10 1.5 10
M 10 x 15 1.5 10
M 10 x 20 1.5 10
M 12 x 12 1.75 10
M 12 x 18 1.75 10
M 12 x 24 1.75 10
Specificaties
Kenmerk Waarde
Thread Size Range M5 → M12
Number of Pieces 230
Set Contents Inserts: M5 x 5 mm (x20); M5 x 7.5 mm (x20); M5 x 10 mm (x20); M6 x 6 mm (x20); M6 x 9 mm (x20); M6 x 12 mm (x20); M8 x 8 mm (x10); M8 x 12 mm (x10); M8 x 16 mm (x10); M10 x 10 mm (x10); M10 x 15 mm (x10); M10 x 20 mm (x10); M12 x 12 mm (x10); M12 x 18 mm (x10); M12 x 24 mm (x10); Twist Drills; HSS Hand Tap; Installation Mandrel; Tang Break-off Tool
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Kit
222,52
(excl. BTW)
269,25
(incl. BTW)
Kit(s)
1 - 9
222,52 €
10 - 24
215,84 €
25 +
209,16 €
Related Products
High quality industrial thread repair kitFor repairing stripped ...
Description:
High quality industrial thread repair kitFor repairing stripped or damaged threads and for use in alloys, cast iron and other light materialsKit contains one of each M5, M6, M8 and M10 installation tools and HSS taps plus ten insert threads ...
Metric ISO thread repair kit.These kits contain 10 ...
Description:
Metric ISO thread repair kit.These kits contain 10 threaded inserts, a drill bit (up to M12), a precision tap, an HSS tap, a fitting tool (up to M12), all supplied in one case.Ideal in situations where a thread has been ...
High quality Recoil™ industrial thread repair kitInserts are ...
Description:
High quality Recoil™ industrial thread repair kitInserts are reduced diameter type which can be installed without the need for a pre-winderKit contains installation ratchet tool, one of each M5, M6, M8, M10 installation tool adaptors and HSS taps plus four ...
Used to repair stripped or damaged threads also ...
Description:
Used to repair stripped or damaged threads also suitable for new applications requiring stronger threads and for changing from imperial to metric threads and vice versa. Intermediate HSS second / intermediate tap and an installation toolIdeal for alloys, other light ...