RSCAL(1770531)NO-GO RING GAUGE M18

  • RS-stocknr. 189-3343
  • Fabrikantnummer 16345 +Cal
  • Fabrikant Volkel
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

The thread NO-GO ring gauge must not screw into the part by hand more than two threads (without using excessive force). If the ring gauge can be screwed into the thread by more than two threads, the thread does not meet the desired requirements (=scrap). The no-go thread gauges are marked in red. The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL using IAC thread scanners.

Specificaties
Kenmerk Waarde
Plug/Ring Ring
Gauge Type No Go Ring
Thread Size M18 x 2.5
Pitch Diameter 2.5mm
Tolerance 6g
Imperial or Metric Metric
Calibrated RSCAL
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
138,72
(excl. BTW)
167,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
138,72 €
Related Products
The Kleffmann & Weese thread gauge has a ...
Description:
The Kleffmann & Weese thread gauge has a range of 0.25mm to 6mm. It is designed to determine the gradient for external and internal threads. It is a useful checking tool for measuring angle while cutting threads in metal turning ...
Used for checking 60° tool points and setting ...
Description:
Used for checking 60° tool points and setting screw thread cutting toolsManufactured from tempered steelSatin chrome finishWorking surfaces are ground for accuracyBoth sides marked with 0.5 and 1mm graduations.
Suitable for Metric 60° threadsNarrow blades permit use ...
Description:
Suitable for Metric 60° threadsNarrow blades permit use for internal & external screw threadsLocking device each end secures blades for storage or useCorrect pitch is determined by matching blade teeth with threadsBlades protected in sturdy steel case.
Penknife style screw pitch gaugesMilled blades. ...
Description:
Penknife style screw pitch gaugesMilled blades.