RSCAL(1770519)GO RING GAUGE M8

  • RS-stocknr. 189-3331
  • Fabrikantnummer 16194 +Cal
  • Fabrikant Volkel
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

The GO thread ring gauge must be possible to manually screw into the entire thread of the part (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap). The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL using IAC thread scanners.

Specificaties
Kenmerk Waarde
Plug/Ring Ring
Gauge Type Go Ring
Thread Size M8 x 1.25
Pitch Diameter 1.25mm
Tolerance 6g
Imperial or Metric Metric
Calibrated RSCAL
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
92,92
(excl. BTW)
112,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
92,92 €
Related Products
The Volkel Go No-Go plug gauge set consists ...
Description:
The Volkel Go No-Go plug gauge set consists of seven pieces of thread gauges in a sturdy plastic case. It is a combination of GO and NO-GO plug gauges. The scrap side of this thread plug gauge is marked with ...
A thread limit plug gauge is a combination ...
Description:
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw ...
The Volkel No-Go ring gauge M8x1.25 is calibrated ...
Description:
The Volkel No-Go ring gauge M8x1.25 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...
A thread limit plug gauge is a combination ...
Description:
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw ...